© 2006 Sony Corporation Printed in China 2-671-556-11(1) US
AK68-00929A
You can enjoy high resolution progressive signals if you have connected a progressive
format TV to the DVD-VCR’s COMPONENT VIDEO OUT jacks (red/green/blue)
using a component video cord.
If you do not connect a progressive format TV but set the “Progressive” setting in the
Screen Setup Menu, the images on your TV screen may become unclear or unnatural. In
this case, the “Progressive” setting can be canceled by pressing SELECT DVD and then
press X (pause) button on the front panel of the unit continuously for 5 seconds or more.
For details, see “B Use this hookup if your TV has component video input jacks” on
page 31 or “To set the “Progressive” setting” on page 58.
If your TV screen should go blank, try pressing the
X (pause) button on the front panel of the unit
continuously for 5 seconds or more.
Need help?
General
