Sony SLV-D910AZ - User Manual

Questions and Answers

C
Cynthia BarronSep 23, 2025
What to do if a tape cannot be inserted into my Sony DVD VCR Combo?
- P
  pgreeneSep 23, 2025
  Check that a tape is not already in the tape compartment.
Z
zmaxwellAug 23, 2025
What to do if my Sony SLV-D910AZ DVD VCR Combo disc does not play?
- D
  djohnstonAug 23, 2025
  If your Sony DVD VCR Combo disc does not play, ensure the disc is inserted with the playback side facing down. The disc may be unplayable if it is skewed, or if the player cannot play certain discs. Also, the region code on the DVD might not match the player. Make sure the TV / DVD·VIDEO switch is set correctly and that you've selected either VIDEO or DVD using the SELECT DVD/ VIDEO button.
G
Gary BoyleAug 25, 2025
Why playback picture does not appear on the TV screen with my Sony SLV-D910AZ DVD VCR Combo?
- M
  mallory32Aug 25, 2025
  If the playback picture doesn't appear on your TV screen when using your Sony DVD VCR Combo, check that the TV is set to the correct channel for the VCR. If you're using a monitor, set it to video input. If the VCR is connected to the TV with the PERITEL cable, ensure the VCR indicator is lit in the display window. Use the TV/VIDEO button on the remote commander to light up the VCR indicator.
H
Heather RobertsAug 26, 2025
Why is the sound from a tape recorded with my Sony SLV-D910AZ DVD VCR Combo not in stereo?
- S
  Sharon WallAug 27, 2025
  If the sound from a tape recorded with your Sony DVD VCR is not in stereo, or the STEREO indicator is flashing, try adjusting the tracking. If the video heads are dirty, clean them using a Sony video head cleaning cassette.
C
Catherine MooreAug 27, 2025
Why VPS/PDC function does not operate properly on my Sony SLV-D910AZ?
- K
  Kelsey ThomasAug 27, 2025
  Check that the clock and the date are set correctly. Check that the VPS/PDC time you set is the correct one (there might be a mistake in the TV programme guide). If the broadcast you wanted to record did not send the good VPS/PDC information, the VCR will not start recording. If the reception is poor, the VPS/PDC signal might be altered and the VCR might not start recording.
J
Joseph OneillSep 17, 2025
Why angles cannot be changed on my Sony SLV-D910AZ?
- M
  Mr. Nicholas Russell PhDSep 18, 2025
  Try using the DVD’s menu instead of the direct selection button on the remote. Multi-angles are not recorded on the DVD being played. The DVD prohibits changing of the angles.
J
Jacqueline NavarroSep 14, 2025
Why the language for the sound track cannot be changed on my Sony SLV-D910AZ DVD VCR Combo?
- D
  Donald SextonSep 14, 2025
  Try using the DVD’s menu instead of the direct selection button on the remote. Multilingual tracks are not recorded on the DVD being played. The DVD prohibits the changing of the language for the sound track.
C
Carol MedinaSep 15, 2025
Why the subtitle language cannot be changed or turned off on my Sony SLV-D910AZ DVD VCR Combo?
- W
  William WilsonSep 15, 2025
  Try using the DVD’s menu instead of the direct selection button on the remote. Multilingual subtitles are not recorded on the DVD being played. The DVD prohibits the changing of the subtitles.
T
timothystoneSep 6, 2025
How to improve poor TV reception on Sony SLV-D910AZ DVD VCR Combo?
- W
  William DiazSep 6, 2025
  If your Sony DVD VCR Combo TV reception is poor, ensure the aerial cable is connected securely. Try adjusting the TV aerial. Also, make sure “SYS. (L/L’ or B/G)” in the “RECHERCHE MANUELLE” menu is set to the same system in your local area.
R
robert59Sep 3, 2025
Why is my Sony SLV-D910AZ making a noisy sound?
- T
  Tonya GreenSep 3, 2025
  If your Sony DVD VCR Combo is making noisy sounds, and you're playing a CD with DTS sound tracks, this noise may come from the OUT AUDIO L/R jacks or DIGITAL OUT jack.