Configuring Windows Firewall
28
When using Windows 8.1 or
Windows 10
Configuring Windows Firewall
SNC toolbox or SNC audio upload tool may not operate
correctly depending on the configuration of Windows
Firewall. (No cameras are shown in the list even if they
are detected.) In this case, confirm the Windows
Firewall configuration as follows:
To turn Windows Firewall off
1
Press the Windows key + X, then select Control
Panel from the displayed list.
2
Click Windows Firewall.
3
Select Turn Windows Firewall on or off.
4
Select Turn off Windows Firewall.
The cameras will be displayed in the list.
To turn Windows Firewall on
1
Press the Windows key + X, then select Control
Panel from the displayed list.
2
Click Windows Firewall.
3
Select Allow an app or feature through Windows
Firewall.
4
Select Allow another app....
To Next Page
Loading...
