Sony SRS-X2 Installation Manual

Installation manual
1. Mount parts on PCB (including main board & jack PCB)
Main board: top side

Main board: bottom side
For a module with print circuit board antenna, to eliminate the influence from other components or ground,
a clearance area around the print circuit board antenna is necessary, please refer to following picture. In
this area, there should be no metal in it. Besides x-y-axis, there should also be no metal at the Z-axis
direction.

Sony SRS-X2 Specifications

General

Speaker type	-
Number of drivers	2
Number of speakers	1
Audio output channels	- channels
Impedance	- Ω
Frequency range	- Hz
RMS rated power	15 W
Peak Music Power Output (PMPO)	20 W
Bluetooth	Yes
Connectivity technology	Wireless
Product color	Blue
Recommended usage	Universal
Battery type	Built-in
Power source type	Battery
Battery recharge time	5 h

Weight and Dimensions

Depth	56.5 mm
Width	171 mm
Height	60.5 mm
Weight	500 g