Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Setting the speaker frequency when playing IMAX content (IMAX Adjustment)
Adjust each speaker you use when watching the IMAX Enhanced content.
5-037-030-11(1) Copyright 2022 Sony Corporation
Select [Setup] - [Audio Settings] from the home menu.
1
Select [IMAX Adjustment].
2
Select the setting you want.
HPF/Crossover: Sets the crossover frequency of speakers other than the subwoofer. (Default setting: Auto, 40 Hz to
200 Hz)
LPF for Subwoofer: Sets the crossover frequency of the subwoofer. (Default setting: Auto, 40 Hz to 200 Hz)
Subwoofer Volume: Sets the volume of the subwoofer playing the IMAX Enhanced contents.
Redirect to Subwoofer: Redirects the low frequency band of the IMAX signal to the subwoofer. When this setting is
set to [On], the bass with the bass management function is output even while playing IMAX content. When this
setting is set to [Off], the bass that IMAX content has is output.
3
To Next Page
Loading...
