SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
TA-SA300WR
SPECIFICATIONS
SURROUND AMPLIFIER
9-893-123-02
2011D05-1
©
2011.04
US Model
Canadian Model
AEP Model
UK Model
Australian Model
Ver. 1.1 2011.04
• TA-SA300WR is the surround amplifi er section in BDV-E780W/E980W.
• Wireless transceivers (EZW-RT50) and main unit (HBD-E780W or HBD-E980W) are necessary to check wireless connection.
Amplifier Section
U.S.models:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC) With 3 ohms loads, both
channels driven, from 180
- 20,000 Hz; rated 45 watts
per channel minimum
RMS power, with no more
than 1% total harmonic
distortion from 250 milli
watts to rated output.
Other models:
POWER OUTPUT (reference)
Surround L/Surround R 167 W (per channel at 3
ohms, 1 kHz)
Rated impedance: 3 - 16
Ω
Power consumption On: 50 W
Standby power consumption
0.5 W (standby mode)
(US and Canadian models)
0.18 W (tur
ned off)
0.13 W (turned off)
(Other models)
Dimensions (approx.) 206 mm × 60 mm × 236
mm (8
1
/8 in × 2
3
/8 in ×
9
3
/8 in) (w/h/d) with the
wireless transceiver
inserted
Mass (approx.) 1.3 kg (2 lb 14 oz)
Design and specifications are subject to change
without notice.
s Standby power consumption 0.13W (US, Canadian
models), 0.18W (Other models).
s Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.
50/60 Hz
220 V - 240 V AC,
120 V AC, 60 Hz
US and Canadian models:
General
Other models:
Power requirement
s
To Next Page
Need help?
General
