Sony STR-AN1000 Help Guide

Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Use this Help Guide when you have any questions on how to use the receiver/amplifier.
This Help Guide mainly describes the procedures for using the remote control. You can also use the controls on the
receiver/amplifier if they have the same or similar names as those on the remote control.
The US, Canadian, and Asia-Pacific models are used for illustrative purposes in this Help Guide unless otherwise noted.
Parts and Controls
Receiver/Amplifier
Front panel
Indicators on the display panel
Rear panel
Remote control
Remote control
Remote control buttons that can be operated for each zone
Preparation
About input/output of video signals
Supported audio/video formats
Playable types of audio files
Digital audio formats supported by the unit
Video formats supported by the unit
Notes on connections
Notes on connecting cables
About HDMI connections
1. Installing speakers
1

Sony STR-AN1000 Specifications

General

Channels	7.2
HDMI Inputs	6
HDMI Outputs	2
Dolby Atmos	Yes
DTS:X	Yes
Wi-Fi	Yes
Bluetooth	Yes
HDMI 2.1	Yes
8K/4K 120Hz	Yes
IMAX Enhanced	Yes
eARC	Yes
Frequency Response	10 Hz - 100 kHz
Dimensions	430 x 156 x 331 mm
HDR Support	HDR10, Dolby Vision, HLG
Auto Calibration	Yes
Streaming Services	Spotify
Total Harmonic Distortion	0.09%
Inputs	HDMI, Optical, Coaxial, USB
Outputs	HDMI, Subwoofer, Speaker
Supported Audio Formats	Dolby Atmos, DTS:X