Setting the BLUETOOTH sound quality (Wireless Playback Quality)
System Settings
Selecting the language used on the menu of the unit displayed on the TV (Language)
Displaying the information on the screen when any settings are changed (Auto Display)
Turning on the unit via the network or BLUETOOTH function (Network/Bluetooth Standby)
Setting the unit to switch to standby mode automatically (Auto Standby)
Switching the brightness of the display panel (Dimmer)
Assigning a name to the unit (Device Name Setting)
Checking the software version and MAC address of the unit (System Information)
Checking software license information (Software License Information)
Setting the FM station receiving mode (FM Mode) (for US, Canadian, and Asia-Pacific models only)
Naming preset stations (Preset Name Input) (for US, Canadian, and Asia-Pacific models only)
Presetting the gain level of the FM tuner (Preset Gain Level) (for US, Canadian, and Asia-Pacific models only)
Software Update
Updating the software (Software Update)
Resetting
Reverting to the factory default settings
Using the menu on the display panel
Operating the unit with the menu on the display panel
Menu list (on the display panel)
Troubleshooting
If the unit does not work properly.
Error messages
[PROTECTOR] or [THERMAL] appears on the display panel.
[ERROR] appears on the display panel.
[Overload has been detected.] appears on the TV screen.
List of messages after Auto Calibration measurements
General
The unit is turned off automatically.
Cannot find an available input when connecting several digital devices.
To Next Page
Loading...
Need help?
General
