The unit does not turn on even when the TV is turned on.
The unit turns off when the TV is turned off.
The unit does not turn off even when the TV is turned off.
Image
No image appears on the TV screen.
4K or 8K content cannot be displayed at the same resolution as the source.
No image is output to the TV from the connected HDMI device when the unit is in standby mode.
The home menu does not appear on the TV screen.
HDR (High Dynamic Range) images cannot be displayed in HDR mode.
The indicator on the display panel turns off.
Image does not appear on the TV screen when the unit is not turned on.
When the language for the on-screen display of the TV is changed, the on-screen display language of the unit is changed
simultaneously.
Sound
No sound or only a very low level of sound is heard, no matter which device is selected.
There is severe humming or noise.
No sound or only a very low level of sound is heard from specific speakers.
No sound is heard from the wireless speaker (not supplied).
Sound heard from the wireless speaker (not supplied) is unstable.
The sound is interrupted.
When a TV is connected to the unit via an HDMI OUT A (TV) jack that supports the eARC or ARC function, sound from the TV is not
output from the speakers connected to the unit.
The center component of the audio is not output from the TV when using the TV as a center speaker by connecting the S-CENTER OUT
jack of the unit to the S-CENTER SPEAKER IN jack of the TV. (The Acoustic Center Sync function is not working)
Cannot select the desired input for playback in Zone 2 or Zone 3.
No sound is heard from the active subwoofer or the center speaker.
Volume level of Zone 2 speakers cannot be adjusted.
There is no sound from a specific device.
The Dolby Atmos-compatible sound played back on the TV is not output from the unit.
The left and right sound is unbalanced or reversed.
Dolby Digital or DTS multi-channel sound is not reproduced.
The surround effect cannot be obtained.
To Next Page
Loading...
Need help?
General
