Sony STR-K1600 - Receiver Component For Ht-ddw1600 User Manual

1
SERVICE MANUAL
E Model
Australian Model
STR-K1600
MULTI CHANNEL AV RECEIVER
Amplifier section
Power Output
1)
Stereo mode output (rated) (6 ohms, 1 kHz,
THD 1%)
90 W + 90 W
1)
85 W + 85 W
3)
Surround mode output (reference)
2)
RMS output
FRONT: 185 W per channel
1)
170 W per channel
3)
(with SS-MSP16)
CENTER: 185 W
1)
170 W
3)
(with SS-CNP16)
SURROUND: 185 W per channel
1)
170 W per channel
3)
(with SS-SRP16)
SPECIFICATIONS
SURROUND BACK: 185 W
1)
170 W
3)
(with SA-WP16)
1) Measured under the following conditions:
Area code Power requirements
E51, AUS, MY, SP, TH 240 V AC, 50 Hz
MX 127 V AC, 60 Hz
AR 230 V AC, 50 Hz
2) Reference power output for front, center surround and
surround back speakers. Depending on the sound field
settings and the source, there may be no sound output.
3) Measured under the following conditions:
Area code Power requirements
AR 220 V AC, 50 Hz
Ver. 1.1 2007. 04
9-887-570-02
2007D04-1
© 2007. 04
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, “Surround EX”, and the double-D
symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS-ES | Neo:6” are registered
trademarks of DTS, Inc. “96/24” is a trademark of
DTS, Inc.
This receiver incorporates High-Definition
Multimedia Interface (HDMI
TM
) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
– Continued on next page –
Photo: Silver type

Sony STR-K1600 - Receiver Component For Ht-ddw1600 Specifications

General

Channels	5.1
FM/AM Tuner	Yes
Impedance	8 Ohms
Total Harmonic Distortion	0.7%
Input Sensitivity	500 mV
Output Power / Channel	100 W
Type	AV Receiver
Surround Sound	Dolby Digital, DTS
Digital Inputs	1 optical
Amplifier Output Details	100W per channel (front), 100W (center), 100W (rear)
Output Impedance / Channel	8 Ohm
Outputs	Subwoofer
Speaker Impedance	8 Ohms
Dimensions	430 mm x 157.5 mm x 310 mm
Input Impedance	50 kOhm

Summary

STR-K1600 Specifications

Amplifier Section Power Output

Details power output ratings for stereo and surround modes.

Surround Mode Output Reference

Specifies reference power output for surround channels.

Measurement Conditions

Lists the conditions under which power output is measured.

Model Identification

Back Panel Model Information

Identifies model numbers and corresponding part numbers for the back panel.

Section 1 General

Description and Location of Parts

Details front panel controls, indicators, and their functions.

Display Indicators Overview

Explains the meaning of various indicators on the receiver's display.

Section 2 Disassembly

Disassembly Procedures

Provides step-by-step instructions for disassembling the receiver's main sections.

Section 3 Test Mode

Test Mode Operations

Outlines procedures for entering and performing various system test modes.

Section 4 FM Tuner Check

FM Auto Stop Check Procedure

Details the steps to verify FM tuner reception and auto-stop functionality.

Section 5 Diagrams

Circuit Board Locations

Illustrates the physical placement of all circuit boards within the receiver.

Block Diagrams Overview

Presents block diagrams for key sections like Tuner/Audio and Digital.

Schematic Diagrams Overview

Provides schematic diagrams for the Main board section (1/2).

Section 6 Exploded Views

Case Section Exploded View

Shows an exploded view of the receiver's case and associated parts.

Front Panel Section Exploded View

Illustrates an exploded view of the receiver's front panel assembly.

Section 7 Electrical Parts List

Parts List by Board

Lists electrical components categorized by the specific circuit board they belong to.

Memo

Revision History