2
STR-K1600
Inputs
Analog Sensitivity: 800 mV/
50 kohms
Digital (Coaxial) Impedance: 75 ohms
Outputs (Analog)
AUDIO OUT Voltage: 800 mV/10 kohms
SUB WOOFER Voltage: 2 V/1 kohm
Tone
Gain levels ±6 dB, 1 dB step
Reproduction frequency range:
28 – 20,000 Hz
FM tuner section
Tuning range 87.5 – 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
Models of area code AUS, MY, SP, TH
With 9-kHz tuning scale: 531 – 1,602 kHz
Models of area code E51
With 10-kHz tuning scale: 530 – 1,610 kHz
4)
With 9-kHz tuning scale: 531 – 1,602 kHz
4)
Models of area code AR, MX
With 10-kHz tuning scale: 530 – 1,610 kHz
Antenna Loop antenna
Intermediate frequency 450 kHz
4) You can change the AM tuning scale to 9 kHz or 10 kHz.
After tuning in any AM station, turn off the receiver.
While holding down TUNING MODE, press ?/1. All
preset stations will be erased when you change the tuning
scale. To reset the scale to 10 kHz (or 9 kHz), repeat the
procedure.
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms
PB/CB: 0.7 Vp-p,
75 ohms
PR/CR: 0.7 Vp-p,
75 ohms
80 MHz HD Pass Through
General
Power requirements
Area code Power requirements
AUS 240 V AC, 50 Hz
MY, SP 230 – 240 V AC, 50/60 Hz
AR, TH 220 – 230 V AC, 50/60 Hz
MX 127 V AC, 60 Hz
E51 120/220/240 V AC, 50/60 Hz
Power output (DIGITAL MEDIA PORT)
(Models of area code AUS, MY, SP, TH only)
DC OUT: 5 V, 700 mA
Power consumption 200 W
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d) (Approx.)
430 × 157.5 × 316 mm
including projecting
parts and controls
Mass (Approx.) 8.0 kg
Design and specifications are subject to change
without notice.
•Abbreviation
E51 : Chilean and Peruvian models
AUS: Australian model
MY : Malaysia model
SP : Singapore model
TH : Thai model
MX : Mexican model
AR : Argentina model
Ver. 1.1
To Next Page
Loading...
Need help?
General
