Sony STR-D365 - Page 4

TEST MODE
FL CHECK MODE
1. Turn off the power supply.
2. While pressing preset buttons [6], [7] and [8], turn on the power.
3. All the FL displays light up (Fig. 1.), after one second some light up several
times, and “END” will be displayed.
4. Turn off the power.
NOTE : The preset memory will be erased if the FL CHECK MODE is
performed. Therefore, note down the memory contents beforehand and
set the preset memory again as before after completely this mode.
STEREO MONO TUNE® TA NEWS INFO TUNING Oud.
M
RRRBRBRB* oS
Fig. 1. When All FL Displays are Lit