Sony STR-DA3300ES Settings Recording Form

INSTRUCTIONS
To access the settings menu:
1. Ensure the receiver is connected to the TV via HDMI.
2. On the remote press AMP, then SHIFT, then MENU to enable the on-screen menu
3. Scroll down to settings
4. Some settings only have to be set once and others can be adjusted
for each listening position.
Pages 1 and 2 - Settings for Position 1 and General Settings
Page 3 - Settings for Position 2
Page 4 - Settings for Position 3
STR-DA3300ES
Settings Recording Form

Sony STR-DA3300ES Specifications

Audio Specifications

impedance	8 Ohm
channel power rating	100 Watts X 7 Amp
zones	2 Zone/2 Room

Power

power consumption (in operation)	480 W
power requirements	AC 120V, 60 Hz
power consumption (in standby)	1 W

Inputs and Outputs

s-video outputs	3 (2 Rear/1 Monitor Out)
composite video outputs	3 (Rear-1 Monitor Output, 2 Video Outputs)
optical audio outputs	2 (Rear)
s-video inputs	5 (1 Front, 4 Rear)
composite video inputs	5 (1 Front, 4 Rear)
coaxial audio digital inputs	3 (Rear)
optical audio inputs	5 (1 Front, 4 Rear)
rca audio inputs	5
rca audio outputs	2
multi-channel input	1 (Rear, 7.1 Channel)
headphone outputs	Yes (Front- Gold)
subwoofer outputs	1 (Rear)
hd component video inputs	3 (Rear)
hd component video outputs	1 (Rear)
12v trigger inputs	3
antenna terminal (am loop)	1 (Rear)
antenna terminal (fm 75 ohm)	1 (Rear)
hdmi connection inputs	3 (Rear)
hdmi connection outputs	1 (Rear)

Weight and Dimensions

weight	34 lbs. 3 oz. (15 kg)
measurements	17" x 7" x 17" (430 mm x 171.5 mm x 430 mm)