To Next PageTo Next Page
Need help?Do you have a question about the Sony STR-DE698 and is the answer not in the manual?
General| Dimensions (WxDxH) | 430 x 298 x 145 mm |
|---|---|
| Power requirements | 230V, 50/60Hz |
| Supported radio bands | FM, MW |
| Radio Data System (RDS) | Yes |
| Total Harmonic Distortion (THD) | 0.7 % |
| I/O ports | 5.1 Analogue Input - 1.0 Audio Input - 2.0 Audio Output - 1.0 Digital Input: coaxial - 1.0 Digital Input: optical - 1.0 Headphone Output Monitor Output (Picture): FBAS - 1.0 Speaker Selector A Video Input - 3.0 Video Output - 1.0 |
| Connectivity technology | Wired |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 180 W |
Weight and Dimensions| Weight | 7000 g |
|---|
Record model and serial numbers for your product.
Connect various audio and video components to the receiver.
Connect the supplied AM loop antenna and FM wire antenna.
Connect speakers to the receiver for a 7.1 channel system.
Connect the AC power cord and set the voltage selector.
Configure speaker size, distance, and location for optimal sound.
Initialize the receiver and reset settings to factory defaults.
Adjust speaker levels and balance using test tones.
Choose the audio/video source for playback.
Enjoy high-quality audio from multi-channel sources via MULTI CH IN.
Tune into FM and AM broadcasts using the built-in tuner.
Automatically scan and store FM stations in alphabetical order.
Manually preset and tune into favorite FM/AM radio stations.
Display RDS information like program service name and text.
Cycle through display information like input, sound field, and RDS data.
Listen to sound from front left/right speakers only.
Bypass sound field processing for standard 2-channel sources.
Automatically detect and decode audio signal types for optimal sound.
Receiver automatically detects and decodes audio signal types.
Specify decoding types for 2-channel audio sources.
Choose from pre-programmed sound fields for immersive audio.
Choose the decoding mode for surround back signals.
Assign a component video input to another visual input.
Select audio input mode for digital components (AUTO, COAX, OPT, ANALOG).
Adjust speaker levels and balance for personalized listening.
Adjust tonal quality (bass, treble) of front speakers using the EQ menu.
Adjust various receiver settings via the CUSTOMIZE menu.
Enter custom names (up to 8 characters) for stations and inputs.
Set the receiver to turn off automatically at a specified time.
Choose the front speaker system (SP A, SP B, or SP A and SP B).
Record audio tapes, MiniDiscs, or video tapes.
Learn to use the RM-AAP001 remote control for system operation.
Switch between AV1 and AV2 command modes for remote operation.
Program the remote to control non-Sony or specific Sony components.
Important safety, heat, and placement precautions for the receiver.
Guide to resolving common audio and operational problems.
Solutions for remote control malfunctions, error messages, and system reset.
Find button locations and corresponding reference pages for quick access.
Alphabetical listing of topics and their page numbers for quick reference.
Details on power output and harmonic distortion across different loads.
Sensitivity, impedance, and voltage for various inputs and outputs.
Power requirements, consumption, AC outlets, dimensions, and weight.
