To Next PageTo Next Page
Need help?Do you have a question about the Sony STR-DG700 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.09% |
| Frequency Response | 10 Hz - 100 kHz |
| Signal-To-Noise Ratio | 100 dB |
| Tuner Bands | AM/FM |
| Preset Station Qty | 30 |
| HDMI Switching | Yes |
| Power Output (RMS) | 100 Watts |
| Inputs | 4 x HDMI, 4 x Composite, 2 x Optical, 1 x Coaxial |
| Outputs | 1 x HDMI, 1 x Composite, 1 x Component |
| Audio Formats Supported | Dolby Digital, DTS |
| Input Impedance | 47 kΩ |
| Audio D/A Converter | 192 kHz / 24-bit |
| Built-in Decoders | Dolby Digital, DTS, DTS Neo:6 |
| Amplifier Output Details | 100.0 Watt - 8.0 Ohm - 20 - 20000 Hz - THD 0.09% - 7.0 channel(s) |
Identifies and explains the functions of the receiver's front panel buttons and displays.
Details the meaning and purpose of various indicators on the receiver's display.
Describes the various input and output jacks located on the rear panel of the receiver.
Explains how to connect the FM wire and AM loop antennas to the receiver.
Introduces the supplied remote commander and its basic functions.
Illustrates typical 5.1 and 6.1 channel speaker system setups for optimal surround sound.
Provides a visual guide for connecting front, center, surround, and subwoofer speakers.
Explains the types of audio connections (digital and analog) and their impact on sound quality.
Shows how to connect components with multi-channel output jacks for surround sound.
Demonstrates connecting components using analog audio output jacks.
Lists video components and refers to specific pages for connection details.
Explains how the receiver can convert and output video signals via different jacks.
Illustrates how to connect a TV monitor to display images from the receiver.
Shows how to connect DVD players and recorders, including audio and video connections.
Guides the user on connecting a satellite tuner to the receiver.
Explains how to connect devices using HDMI cables for digital video and audio transmission.
Illustrates connecting components like VCRs using analog video and audio jacks.
Provides instructions for connecting the AM loop and FM wire antennas for optimal reception.
Guides on connecting the AC power cord and performing the initial setup for factory defaults.
Explains how to select the front speaker system (A, B, or A+B) to be driven by the receiver.
Outlines the steps for automatically calibrating speaker levels and distances using the optimizer microphone.
Explains how to use the test tone to adjust speaker levels and balance for optimal sound.
Guides on selecting different input sources for playback and adjusting volume.
Instructions for playing Super Audio CD or CD discs and adjusting volume.
Steps for watching a DVD, including player setup and disc playback.
Provides instructions on how to navigate the receiver's amplifier menus and adjust settings.
Lists the available menu options (LEVEL, EQ, SUR, TUNER, AUDIO, VIDEO, SYSTEM) and their parameters.
Explains how to tune into FM and AM radio stations using automatic or direct tuning methods.
Guides on automatically storing FM stations and manually presetting FM/AM stations.
Explains how to use RDS to display radio station information and program types.
Describes how to select different audio input modes (AUTO, COAX, OPT, ANALOG).
Instructions on reassigning component video and HDMI inputs to different input selections.
Allows users to customize input names and cycle through display information.
Guides on how to program the remote to control other audio/video components.
Instructions for resetting the remote to its factory default settings.
Defines technical terms related to audio and video formats and technologies.
Outlines important safety precautions, placement guidelines, and cleaning instructions.
Provides solutions for common problems such as no sound, poor reception, or remote malfunctions.
