Sony STR-DH130 - Page 25

STR-DH130
25
Pin No. Pin Name I/O Description
54 NO-USE
O
NO-USE
55 NO-USE
O
NO-USE
56 NO-USE
O
NO-USE
57 NO-USE
O
NO-USE
58 NO-USE
O NO-USE
59 NO-USE
O
NO-USE
60 NO-USE
O
NO-USE
61 NO-USE
O NO-USE
62 Vcc2
—
Power supply terminal (+3.3V)
63 NO-USE
O
NO-USE
64 Vss
—
Ground terminal
65 AD_1 I Key input terminal (A/D input)
66 AD_0 I Key input terminal (A/D input)
67 VOL_JOG_B I Volume encoder input terminal
68 VOL_JOG_A I Volume encoder input terminal
69 INPUT-JOG_B I Input Selector encoder input terminal
70 INPUT-JOG_A I Input Selector encoder input terminal
71 NO-USE
O
NO-USE
72 NO-USE
O
NO-USE
73 POWER_SW I Power Key input (Interrupt) (H: Inactive, L: Active)
74 NO-USE
O
NO-USE
75 NO-USE
O
NO-USE
76 NO-USE
O
NO-USE
77 NO-USE
O
NO-USE
78 NO-USE
O
NO-USE
79 NO-USE
O
NO-USE
80 NO-USE
O
NO-USE
81 FUSE_DETECT I Fuse open detection signal input (H: Normal, L: Fuse Blown)
82 POWER_RY
O
Power relay driver control signal output (H: On, L: Off)
83 HP_RY O Headphone relay driver control signal output (H: On, L: Off)
84 BRIDGEABLE_RY O Bridgeable relay driver control signal output (H: Upper Tap, L: Lower Tap)
85 SP-A_RY O Front speaker A relay driver control signal output (H: On, L: Off)
86 SP-B_RY O Front speaker B relay driver control signal output (H: On, L: Off)
87 PROTECTOR I Protector detection signal input (H: Normal, L: Protect)
88 HP_DETECT I Headphone detection signal input (H: HP In, L: HP Out)
89 SOUND_DETECT I Sound detection signal input for Auto Standby (H: Sound, L: No Sound)
90 TEMP_SENSOR_1 I Temperature detection signal input
91 TEMP_SENSOR_2 I Temperature detection signal input
92 VACS_IN I VACS detection signal input
93 NO-USE
O
NO-USE
94 NO-USE
O
NO-USE
95 NO-USE
O
NO-USE
96 Vss
—
Ground terminal (for A/D conversion)
97 NO-USE
O
NO-USE
98 Vref I A/D Converter reference voltage input terminal (+3.3V)
99 AVcc
—
Power supply terminal (+3.3V) (for A/D conversion)
100 NO-USE
O
NO-USE