STR-KG800
5
About the indicators on the display
SW
LFE
LC
SL S
D
PLII
PL OPT DTS MEMORY RDS ST
MONOD.RANGECOAXHDMI
R
SR
RRBRG RTRE
Name Function
" SW Lights up when the audio signal
is output from the SUB
WOOFER jack.
# LFE Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
$ D Lights up when the receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set to
“AUTO” .
% PLII Lights up when the Pro Logic II
Movie/Music decoder is
activated.
& PL Lights up when the receiver
applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals.
' OPT Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack.
Name Function
( DTS Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is set to
“AUTO”.
) MEMORY Lights up when a memory
function, such as Preset
Memory, etc., is activated.
* Tuner
indicators
Lights up when using the
receiver to tune in radio stations,
etc.
Note
“RDS” appears for models of
area code CEL, CEK only.
+ Preset
station
indicators
Lights up when using the
receiver to tune in preset radio
stations.
, D.RANGE Lights up when dynamic range
compression is activated.
- COAX Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the COAXIAL
jack.
. HDMI Lights up when the receiver
recognizes a component
connected via an HDMI IN jack.
/ Playback
channel
indicators
L
R
C
SL
SR
S
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
SW
LCR
SL SR