Need help?Do you have a question about the Sony SVO-5800 and is the answer not in the manual?
General| Operating Temperature | 5°C to 40°C |
|---|---|
| Storage Temperature | -20°C to 60°C |
| Video Format | S-VHS |
| Recording Speed | SP, LP |
| Audio System | Hi-Fi Stereo |
| Connections | Composite, S-Video, Audio In/Out |
| Video Signal System | NTSC |
| Fast Forward/Rewind Time | Approx. 3 minutes (for T-160 tape) |
| Input | Composite Video, Audio L/R |
| Output | Composite Video, S-Video, Audio (RCA), RF |
| Power Requirements | AC 120V, 60Hz (or region-specific) |
| Audio Frequency Response | 20 Hz to 20 kHz |
Details the built-in CPI circuit and YX filter for enhanced image clarity and color.
Highlights hi-fi audio recording capabilities and audio noise reduction features.
Illustrates and labels all controls, indicators, and connectors on the unit's front panel.
Shows and labels all connectors and switches located on the unit's rear panel.
Provides essential safety guidelines regarding power supply and cabinet handling.
Details important precautions for operating the unit in various environmental conditions.
Lists compatible S-VHS and VHS cassette types and their recording/playback times.
Step-by-step guide for playing back recorded tapes using the unit's front panel controls.
Procedure to adjust tracking for clear playback when snow or streaks appear.
Instructions for performing basic recording functions using the unit's front panel.
Sample connection diagram for cut editing using a recorder and a player.
Details on phase synchronization for A/B roll editing systems using a vectorscope.
Explains how to display time data (CTL, LTC, VITC, User Bits) on the monitor.
Procedure to preset initial time code and user bit values for recording.
Describes the hierarchical structure of the unit's set-up menu system.
Details settings related to the unit's operational modes and tape transport controls.
Explains settings for displaying information on the monitor screen and unit indicators.
Describes settings for the time code generator, including run mode and drop-frame.
Details settings for video signal control, including recording format and noise reduction.
Explains settings for audio signal output, hi-fi recording, and Dolby NR.
Identifies and explains the function of buttons used for navigating and changing menu settings.
Procedure to reset all menu settings to their factory default values.
Lists common alarm messages and their corresponding meanings and solutions.
Explains how the unit detects internal faults and displays error codes.
Provides a chart to diagnose and resolve common tape, time data, and monitor issues.
Instructions for cleaning the video heads using a cleaning cassette.
Guide to displaying the digital hours meter for maintenance scheduling.
Provides power requirements, operating conditions, mass, and external dimensions.
Details tape speed, maximum recording/playback time, and recommended cassettes.
Lists and describes all video, audio, and time code input connectors.
Lists and describes all video, audio, and time code output connectors.
To Next Page
