Need help?Do you have a question about the Sony SVO-9620 and is the answer not in the manual?
General| Video Signal System | NTSC |
|---|---|
| Tape Format | U-matic |
| Inputs | Composite video |
| Outputs | Composite video, audio (XLR), timecode (BNC) |
| Audio Frequency Response | 50 Hz to 15 kHz |
| Power Requirements | AC 120 V, 60 Hz |
| Tape Speed | 9.53 cm/s (3 3/4 inches/s) |
| Recording Time | Up to 60 minutes with KCA-60 cassette |
| Remote Control | Yes |
Details the key features and capabilities of the SVO-9620 VTR.
Presents recommended system setups and connection examples for optimal VTR use.
Explains how to connect and record video signals from external video devices.
Details the setup for automatically recording video signals received via satellite.
Guides on integrating the VTR with an editing control unit for system management.
Lists and describes optional accessories that enhance the VTR's functionality.
Describes the purpose and function of all controls and indicators on the VTR's front panel.
Explains the function of controls and switches located on the VTR's sub panel.
Details the various input/output connectors and ports on the VTR's rear panel.
Essential safety guidelines to prevent electrical shock, fire hazards, and equipment damage.
Guidelines for proper placement, ventilation, and environmental conditions for operation.
Illustrates how to make necessary connections for external video equipment.
Information on compatible cassettes and proper handling procedures.
Covers essential setup steps, including audio system selection, before recording.
Configures the VTR's behavior (rewind, stop, eject) when the tape reaches its end.
Step-by-step instructions for initiating and performing a recording session.
Guides on selecting and monitoring audio signals while recording is in progress.
Explains the process of adding or replacing audio tracks on a recorded tape.
Instructions for setting up unattended recordings based on a preset timer schedule.
Details on setting up automatic recording triggered by incoming video signals.
Outlines the necessary settings and checks prior to initiating tape playback.
Step-by-step instructions for playing back recorded tapes and basic controls.
Guides on setting start/stop points for continuous playback of specific tape segments.
Methods for precisely finding specific scenes or points on a tape using search functions.
Instructions for setting up automatic playback of tapes at a preset time.
Provides solutions for common VTR operational problems and issues.
Lists VTR error codes and their corresponding meanings and corrective actions.
Procedure for cleaning the VTR's video heads to maintain picture quality.
Details the VTR's menu system, available items, and their respective settings.
Presents detailed technical data, including power, dimensions, and signal formats.
Provides definitions for technical terms and jargon used in the manual.
To Next Page
