Sony SWF-BR100 User Manual

• Stays lit in red:
- Checkthe location of the
subwoofer.
- Do not place the TV and
subwoofer in a metal cabinet.
- Place the subwoofer close to the
TV in a room.
- Make sure that the wireless
transceiver is inserted correctly
into the TV.
- Please confirm that power
setting of Wireless Subwoofer of
TV is Auto.
• Flashes in green or amber slowly
or turns red:
- Make the Secure Link setting
again.
- Sound transmission is poor.
Move the subwoofer so that the
power indicator turns green or
amber.
• Flashes in red:
- Press power to turn off the
subwoofer, and check that
nothing is blocking the
ventilation slit of the subwoofer.
A protection function may act by
excessive input. Please lower TV
volume orthe SW level.
Noise is heard from the
subwoofer or sound from the
subwoofer is intermittent.
• Move the subwoofer closer to the
TV.
• Do not install the TV and subwoofer
in a closed rack, on a metal rack, or
under a table.
• Move the subwoofer away from
other wireless devices.
• Avoid using any other wireless
devices.
The sound output from the
subwoofer is very low.
• Check the subwoofer level in the
sound setting of the TV.
• With some types of content such as
news there will not be a lot of bass
sound, this is normal.
Specifications
Wireless Subwoofer
(SWF-BRIO0)
Amplifier section
For U.S.A model:
(FTC)
With 4 ohms load, subwoofer
channel driven, from 30 - 150 Hz;
rated 45 W per channel minimum
RMS power, with no more than 1%
total harmonic distortion from 250
milliwatts to rated output.
POWER OUTPUT (reference)
100 W(per channel at 4 ohms,
100
Hz)
For Canadian and Mexican model:
POWER OUTPUT (rated)
70 W (4 ohms, 100 Hz,1% THD)
POWER OUTPUT (reference)
100 W (4 ohms, 100 Hz)
Speaker System
Subwoofer, sealed enclosure
Speaker Unit
200 mm cone type
Rated impedance
4 ohms
Power requirements
120 V AC, 60 Hz
Power consumption
On: 30W
Standby mode: 0.SW or less
Dimensions (approx.) (w/h/d)
272 mm x 305 mm x 395 mm
10 3/4 in x 121/8 in x 15 5/8 in
Mass (approx.)
12.2kg
26 Ib 14 3/10 oz
us

Sony SWF-BR100 Specifications

General

Product color	White
Impedance	4 Ω
Subwoofer type	Active subwoofer
Wireless subwoofer	Yes
Subwoofer frequency range	- Hz
AC input voltage	120 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	30 W

Weight and Dimensions

Subwoofer depth	395 mm
Subwoofer width	272 mm
Subwoofer height	306 mm
Subwoofer weight	12200 g