Sony TA-E9000ES Operating Instructions (primary manual) - Specifications

45
GB
Additional Information
Specifications
Audio section
Harmonic distortion
Less than 0.05% (with
sound field, and
equalizer bypassed)
Frequency response
PHONO:
20 Hz ~ 20 kHz
RIAA ±0.5 dB
LINE (TUNER, CD,
MD/DAT, TAPE,
TV (TV/DBS), DVD,
LD, VIDEO 1, 2, and
VIDEO 3):
20 Hz ~ 20 kHz
+0/–0.2 dB (with
sound field, and
equalizer bypassed)
Signal-to-noise ratio
DIGITAL IN: 100 dB
(20 kHz LPF, A)
PHONO: 82 dB (A) *
LINE: 94 dB
(20 kHz LPF, A) **
* Measured at REC OUT
** 2.5 V input level
Inputs (Analog)
PHONO:
Sensitivity: 5 mV
Impedance:
50 kilohms
LINE (TUNER, CD,
MD/DAT, TAPE,
TV (TV/DBS), DVD,
LD, VIDEO 1, 2, and
VIDEO 3):
Sensitivity: 250 mV
Impedance:
50 kilohms
Inputs (Digital)
DVD (coaxial):
Sensitivity: 0.5 Vp-p
Impedance: 75 ohms
LD (AC-3 RF):
Impedance: 75 ohms
LD (coaxial):
Sensitivity: 0.5 Vp-p
Impedance: 75 ohms
CD (coaxial):
Sensitivity: 0.5 Vp-p
Impedance: 75 ohms
CD, MD/DAT, TV (TV/
DBS), LD (Optical)
DVD (optical)
Outputs (Analog) MD/DAT, TAPE
(REC OUT); VIDEO
1, 2, 3 (REC OUT):
Voltage: 250 mV,
Impedance:
1 kilohm
PRE OUT (FRONT L/
R, CENTER, REAR
L/R, WOOFER):
Voltage: 1 V
Impedance:
200 ohms
PHONES:
Accepts low- and
high-impedance
headphones
Outputs (Digital)
MD/DAT (Optical)
Sampling Frequency
48 kHz
EQ BASS:
100 Hz ~ 1.0 kHz
(21 steps)
MID:
99 Hz ~ 8.6 kHz
(41 steps)
TREBLE:
1.0 kHz ~ 10 kHz
(21 steps)
Gain levels:
±10 dB, 1 dB step
Decodable Digital Formats
Dolby Digital (AC-3),
MPEG, DTS,
Linear PCM