Sony TC-260 Service Manual

Serial No. 29,001 and after
Specifications
Power Requirement:
Outputs :
TC-260
Tape Speeds:
Frequency Response:
Signal-to-Noise Ratio:
Flutter and Wow:
Bias Frequency:
Level Indication:
Inputs :
Weight:
Dimensions :
Trapslstors :
SONY
SERVICING GUIDE
100, 110, 117, 125, 220 or 240 volts (Voltage selector provided in the set)
AC 50 Hz or 60 Hz (Convertible, see page 8)
55 watts
Instantaeous selection 7% ips or 3?.j. ips ( 19 or 9.5cm/s)
30-18,000 Hz at 1% ips
±3 dB 50-15,000 Hz at 7X ips
30-13,000 Hz at 3M ips
Better than 50 dB
Less than 0.19% at l'/z ips
Less than 0.25% at 3^ ips
Approx. 55 Kc
Two VU Meters ( calibrated to 0 dB at 12 dB below saturation )
Microphone inputs ( low impedance )
Auxiliary inputs ( high impedance )
Line outputs ( low impedance )
Auxiliary Record/Playback Connector
2SC401 (X8), 2SC4O2 (x8),
2SC318 (X2), 2SD28 (x6)
Approx. 34 lbs. (15.5 Kg)
21 *•/«/ Wx 15 ’ 73/ D x 7 7 / 8 " H
(541 WX392 DX200 H mm)

Sony TC-260 Specifications

General

Brand	Sony
Model	TC-260
Category	Measuring Instruments
Language	English