Sony TC-880-2 - Service Manual

This complete service manual contains TC-880-2 PART 1,
therefore discard your TC-880-2 PART 1.
US Model
Canadian Model
E Model
UK Model
STEREO TAPECORDER
SPECIFICATIONS
Power Requirements:
120 V ac 50/60 Hz
Canada 120 V ac 50/60 Hz
100, 110, 120, 127,
220, 240 V ac
110, 127, 220, 240 V ac
50/60 Hz
50/60 Hz
Power Consumption:
S/N Ratio: 65dB with SONY ferri-chrome tape
62dB with SONY SLH-180 tape
59 dB with standard tape
Harmonic Distortion: 0.5 %
Crosstalk at 1 kHz: 55 dB
Frequency Response: According to NAB standard
Tape Speed
19 cm/sec (7 '/2 ips) 38 cm/sec (15 ips)
Tape
SONY standard
25~20,000Hz + 2dB 25~30,000Hz + 2dB
SONY SLH
25~25,000Hz+2dB | 25~35,000Hz + 24B
SONY ferri-chrome 30~30,000Hz + 2dB [ 20~40,000Hz + 2dB
Track System:
record 2-track 2-channel stereo/monaural
playback
4-track 2-channel stereo
2-track 2-channel stereo/monaural
Tape Speed: 38 cm/sec (15 ips)
19 cm/sec (71/2 ips)
Recording Time: With 1,100 m (3,600 ft) tape,
26.7 cm (102 inch) ree!
Stereo recording
approx. 45 min. at 38 cm/sec (15 ips)
approx. 90 min. at 19 cm/sec (71/2 ips)
Mono recording
approx. 180 min. at 19 cm/sec (7¥/2 ips)
Fast Winding Time: With 740 m (2,400 ft) tape,
26.7 cm (10¥2 inch) reel
approx. 2 min. 30 sec.
Reels: 26.7 cm (10/2 inch) or smalier
Drive System: Direct drive
Bias Frequency: 160 kHz
Equalization: NAB standard
Wow and Flutter: According to NAB standard
0.02 % at 38 cm/sec (15 ips), WRMS
0.03 % at 19 cm/sec (74/4 ips), WRMS
According to DIN standard
+ 0.03 % at 38 cm/sec (15 ips)
+ 0.04 % at 19 cm/sec (71/2 ips)
Inputs: MIC IN
(phone jack) ... 2
(connector, XLR-3-13)
... 2 (E, UK Model)
(connector, XLR-3-14)
..- 2 (USA, Canada Model)
Sensitivity 0.2 mV (—72 dB)
Accept low impedance mics.
LINE IN (phono jack) ......... 2
Sensitivity 0.06 V (—22 dB)
Impedance 100 kQ
SERVICE MANUAL

Sony TC-880-2 Specifications