Sony TC-K6 - Page 11

TC-K6/K6B
Function
Switch
Board
Position
Adjustment
Function
Solenoid
(PM1)
Position
Adjustment
1.
Push
the
forward
button
(»)
with
the
gear
held,
and
confirm
that
the
condition
of
the
gear
and
the
tip
of
trigger
lever
is
as
shown
below.
@
Adjust
the
position
of
the
function
solenoid
for
the
Adjust
the
position
of
the
function
switch
specitied
clearance.
board
so
that
the
motor
rotates.
function
solenoid
(PM1)
tip of trigger lever
Function Motor Pulley Height Adjustment
Adjust the position of the motor pulley for the
specified clearance.
motor pulley
adjustment screw
2.6x6
1.3-1.7mm
function
motor
(M2)
function switch board
Pause Solenoid (PM2) Position Adjustment
Capstan
Motor
Pulley
Height
Adjustment
1.
Push
the
pole
piece.
Adjust the position of the pause solenoid for
the specified clearance.
gear (B}
motor pulley
adjustment screw i
1.4x5
0.3mm 0.4-0.8mm
Adjust the position of the motor pulley for the 2.
specified clearance.
capstan motor
(M1)
pause trigger
pause solenoid lever
(PM2)