Sony TC-K6 - Function Block and Exploded Views

TC-K6/K6B
FUNCTION BLOCK REMOVAL
Refer to the exploded views on page 9.
NOTE ON THE FUNCTION
BLOCK INSTALLATION
trigger lever
function plate
. The tip of each trigger
lever should be in the
hole of each function
plate.
2. Each gear and lever
should be properly
installed.
INSTALLATION OF MECHANISM SECTION AND FUNCTION BLOCK
1 Push the five shift levers with
fingers.
function lever
. Set the shift lever under the
function lever.
. Install the mechanism section
and the function block.
shift lever