Sony TC-RX300 - Page 8

Basic Operations
Basic Operations
3-856-130-11(1)
7
EN
Press
R
L
dB –30 –20 –10 –4 0 +2 +4 +6 +8
–
∞
7
Start playing the program source.
To
p
5
Turn REC LEVEL to adjust the recording level.
The recording level should
not exceed the
recommended level for the
indicated tape type.
After doing the all
adjustments, stop playing
the program source.
6
Press P PAUSE or ·.
Recording starts.
z The Dolby HX PRO*
system automatically
works during recording
* HX Pro headroom extension
originaled by Band & Olufsen and
manufactured under license from
Dolby Laboratories Licensing
Corporation.
“DOLBY, “ the double-D symbol
a and “HX PRO” are trademarks
of Dolby Laboratories Licensing
Corporation.
For details on DOLBY HX PRO,
See “Glossary” on page 14.
For type IV tape
For type I or
type II tape
Stop recording
Take out the cassette
Pause P PAUSE. Press the button again to resume
recording.
§ EJECT after stopping recording
PRr
§
0
)
REC MUTE
PAUSE
RESET
REC
p
ª·
OFF
L R
MPX
FILTER
DOLBY NR BALANCE
AUTO CAL
EJECT
POWER
REC LEVEL
PHONES
0
1
2
3
4
5
6
7
8
9
10
MEMORY
CC
BB
0 AMS )
A
Å
DIRECTION
a
DOLBY NR BALANCE
To adjust the recording balance
Turn BALANCE so that the L (left channel) and R (right channel) peak level
meters in the display are at the levels you want.
To record with the Dolby NR system
Turn DOLBY NR clockwise to the position you want (B or C) before you start
recording.
If you cannot get satisfying results when recording FM
broadcasts with Dolby NR system
Turn DOLBY NR counterclockwise to the position you want (B or C with
MPX FILTER) before you start recording. The filter turns on to make the
Dolby NR system work more effectively. (For details on the MPX filter, see
“Glossary” on page 14.)