– 5 –
CABINET (REAR), “LID BLOCK ASSY, CASSETTE”
Note: Follow the disassembly procedure in the numerical order given.
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
SET
CABINET (REAR),
“LID BLOCK ASSY, CASSETTE”
MAIN BOARD,
MECHANISM DECK (MT-30D-118)
BELT
8 lid block assy, cassette
INSTALLATION “SPRING, CASSETTE”
cabinet (front)
5 strap, hand
3 claw
3 four claws
2 screw
(IB lock)
4 cabinet (rear)
1 three screws
(B1.7 × 10)
7 boss
7 boss
6 Remove five solders.
lid, cassette
spring, cassette
spring, cassette