15
GB
* If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. A humming noise may be heard, but this is not a
malfunction.
Displaying this monitor’s name, serial number,
and date of manufacture (INFORMATION)
1
Press the MENU button.
The main MENU appears on the screen.
2
Press the
+
++
+
/
−
−−
−
buttons to highlight LANGUAGE/
INFORMATION and press the ENTER button.
The LANGUAGE/INFORMATION menu appears on the
screen.
3
Press the ENTER button to select
(INFORMATION).
This monitor’s information box appears on the screen.
If the problem persists, call your authorized Sony dealer and give
the following information.
• Model name: CPD-110EST or CPD-210EST
• Serial number
• Name and specifications of your computer and graphics board.
Picture is ghosting
• Eliminate the use of video cable extensions and/or video switch boxes.
• Check that all plugs are firmly seated in their sockets.
Picture is not centered or sized
properly
• Adjust the size or centering (page 10). Note that some video modes do not fill the screen
to the edges.
Edges of the image are curved
• Adjust the shape of the picture (page 10).
Wavy or elliptical pattern (moire)
is visible
• Cancel the moire (page 12).
x
Problems caused by the connected computer or other equipment
• Change your desktop pattern.
Color is not uniform
• Degauss the monitor* (page 12). If you place equipment that generates a magnetic field,
such as a speaker, near the monitor, or if you change the direction the monitor faces, color
may lose uniformity.
White does not look white
• Adjust the color temperature (page 11).
A hum is heard right after the
power is turned on
• This is the sound of the auto-degauss cycle. When the power is turned on, the monitor is
automatically degaussed for 5 seconds.
Symptom Check these items
MODE L : CPD- 110EST
SERIAL:12345678
MANUFACTURED : 1998 - 52
SELECT EX I T
LANGUAGE / INFORMAT ION
Example
To Next Page
Loading...
