Sony Trinitron KV-27V66 - Connecting Your TV; Basic Connections; Cable and Antenna Setup for Specific Models

Connecting Your TV
This section covers basic connections in addition to any optional
equipment you may be connecting.
Basic Connections
TV with indoor or outdoor antenna, or CATV cable
Depending on the cable available in your home, choose one of the
connections below:
A VHFonly = 75-ohm C “e 75-ohm ‘
VHFIUHF = coaxial cable coaxial cable
or 5p eee Rear of TV) UKE | —___>
Cable ae (Rear of TV)
VHF/UHF
-—=p —«<)
B VHFonly 300-ohm twin a
or lead cable f
(Rear of TV) EAC-66 U/V mixer
pda
SCA
BO—<8
vurvune
aun
oS
(not
supplied)
300-ohm twin
VHF/UHF Antenna connector : lead cable
2
If
you
are
connecting
to
an
indoor
or
outdoor
antenna,
it
jibe
adjust
the
orientation
of
the
antenna
for
best
reception.
Cable and antenna
KV-27S66, 27V66 only
If your cable provider does not feature local channels, you may find this
set up convenient.
CATV cable
TY] EB) (Rear of TV)
AUX
(No connection “TO | TO CONVERTER
CONVERTER” in this case)
——€9) VHF/UHF
Antenna cable
#2 Select CABLE or ANT mode by pressing 2S on the remote control.