To Next PageTo Next PageHow to fix Sony TV remote control that is not working?
If the remote control for your Sony TV isn't working, try replacing the batteries first. If that doesn't solve the issue, make sure the remote control is in the correct mode for the device you're trying to control by pressing the > or . button.
Why is the standby indicator flashing on my Sony TV?
If the standby indicator on your Sony TV is flashing, and it’s an irregular flash, do not attempt to open the TV. Refer to qualified personnel for assistance. If the flashing is regular, it could be due to EPG data being obtained; wait until the flashing stops. Alternatively, a timer record event may have been set; wait until the recording has ended.
Why is my Sony LED TV remote control not working?
If your Sony LED TV remote control isn't working, it might be due to low batteries. Try replacing them. Also, ensure the remote is in the correct mode for controlling your TV by pressing the appropriate mode button.
What to do if my Sony Trinitron KV-32HQ100K TV screen is dark, but the sound is fine?
If your Sony TV displays a poor or no picture (dark screen) but has good sound, go to the ‘Picture Adjustment’ menu and adjust the brightness, picture, and color levels.
How to restore color on my Sony TV?
If your Sony TV is not displaying color on color programs, go to the ‘Picture Adjustment’ menu and adjust the color setting.
Why are some channels blank on my Sony Trinitron KV-32HQ100K?
If some channels appear blank on your Sony TV, it may be due to the channel being scrambled or subscription-only. In this case, subscribe to the pay-per-view broadcaster. It could also be a programme used only for data or not being transmitted. See ‘Programme sorting’ section (refer to page 20).
What to do if my Sony Trinitron KV-32HQ100K TV picture is distorted when changing channels?
If you are experiencing a distorted picture when changing programs or selecting teletext on your Sony TV, switch off all additionally connected equipment.
How to fix a Sony LED TV with no picture but sound?
If your Sony LED TV has poor or no picture (the screen is dark) but good sound, and some channels are blank, select the ‘Picture Adjustment’ menu and adjust the brightness, picture, and colour levels. Also, make sure you have subscribed to the pay-per-view broadcaster.
Why is there good picture but no sound on my Sony Trinitron KV-32HQ100K TV?
If your Sony TV shows a good picture but has no sound, first, press the + button on the remote control to increase the volume. If that doesn't work, go to the Sound Adjustment menu and ensure that the TV speakers are set to ‘On’.
What to do if my Sony TV has no picture and no sound?
If your Sony TV has no picture or sound, make sure the TV is plugged in and powered on. If the TV is in standby mode, press the power button on the front of the TV or the power ( ) button on the remote control. Also, verify that the aerial is properly connected.
General| Screen Size | 32 inches |
|---|---|
| Display Technology | CRT |
| Aspect Ratio | 4:3 |
| Tuner | Analog |
| Color System | PAL/SECAM/NTSC |
| Sound Output | 20W |
| Speaker Type | Built-in |
| Sound System | Nicam Stereo |
| Input Ports | Composite, S-Video, SCART |
Verifies that all required accessories are present before setup.
Provides instructions on how to correctly insert batteries into the remote.
Guides on connecting external video sources like aerials and VCRs.
Details the procedure for turning the television on for the first time.
Explains the automatic process for scanning and storing TV channels.
Instructs how to locate and display channels from connected video equipment.
Explains how to display two channels simultaneously on the screen.
Details how to adjust the picture aspect ratio for different broadcasts.
Describes how to access and browse stored favourite TV channels.
Guides users on how to access the menu for managing favourite channels.
Explains the process of adding new or removing existing favourite channels.
Provides instructions for removing all previously saved favourite channels.
Details how to filter programmes by category for easier browsing.
Guides on setting timers for recording or viewing specific programmes.
Instructions on accessing and navigating teletext services on the TV.
Explains how to view enhanced teletext services with group and block topics.
Step-by-step guide on inserting a Memory Stick into the TV.
Instructions on safely removing the Memory Stick from the TV.
Overview of the menu for managing Memory Stick contents like pictures.
Guides on how to select and view pictures stored on the Memory Stick.
How to display stored pictures as an automated slideshow.
Configuration options for slideshow interval, repeat, and directory display.
Instructions on selecting different folders on the Memory Stick.
Process for formatting a Memory Stick, erasing all data.
Explains how to freeze and save the current TV screen image.
Options for customising picture settings like contrast, brightness, and colour.
Options for customising sound settings like volume, equalizer, and audio type.
Accesses advanced settings like language, country, and tuning.
Configures the signal source output from the AV3 SCART socket.
Allows naming of connected AV equipment for on-screen identification.
Corrects picture jitter when playing back tapes from a VCR.
Settings to configure the TV screen, including auto format and rotation.
Allows selection of the preferred provider for EPG information.
Guides on connecting devices like DVD players and Hi-Fi to rear ports.
Guides on connecting devices like PlayStation and camcorders to front ports.
Instructions on programming the remote to control other brands of VCR/DVD.
Explains how to program the remote to learn functions from other devices.
Process to remove the most recently learned remote control function.
How to clear all learned functions from the remote control.
