Sony Trinitron KV-32V26 - Page 19

Press
repeatedly
until
the
TV
displays
the
approximate
time
in
minutes
(30,
60,
or
90)
that
you
want
the
TV
to
remain
on
before
shutting
off
automatically.
Cancel
by
pressing
until
“SLEEP
OFF”
appears.
DISPLAY
Press
repeatedly
to
step
through
available
displays:
Status
Channel
number,
current
time,
channel
caption
{if
set),
and
MTS
mode
(if
SAP
is
selected)
are
displayed.
SAP
indication
disappears
after
three
seconds.
XDS
XDS
(Extended
Data
Service)
shows
a
network
name,
program
name,
program
type,
program
length,
call
letters,
and
time
of
the
show
if
the
broadcaster
offers
this
service.
Caption
Vision
Caption
Vision
will
be
displayed
on
the
screen
if the
broadcaster
offers
this
service.
(see
right)
To
cancel
the
display,
press
DISPLAY
repeatedly
until
“DISPLAY
OFF”
appears.
“DISPLAY
OFF”
disappears
after
three
seconds.
Press repeatedly to step through available video inputs:
TV, Video 1 and Video 2 (KV-27S26, 27836, 29RS26, 29RS26C, 32826,
32836, 32TW26, 34RS26C, 35S26, 35S36, 37RS26 only)
TV, Video 1, Video 2 and Video 3 (KV-27V26, 27V36, 29V36C, 29V66M,
29V76M, 32V26, 32V36, 34V36C, 35V36, 35V76, 37V36M only)
Press to change the VHF/UHF input to the AUX input (KV-27S36, 27V36,
29V36C, 29V76M, 32836, 32V36, 34V36C, 35S36, 35V36, 35V76, 37V36M only)
For detailed connection information, see “Cable box and cable” or “Cable and
antenna” on page 3.
KV-27V26,
27V36,
29V36C,
29V66M, 29V76M,
32V26, 32V36,
34V36C,
35V36,
35V76,
37V36M
only.
Press to turn off the TV and all other equipment connected with S-Link and
return the TV input to either antenna or AUX, whichever was last used.
Press this button to cycle through the Multi-channel TV Sound (MTS) options. (page 20
TVNVIDEO
SYSTEMOFF |
MTS/GUIDE
CAPTION VISION
Gi 3
4
[© | Texts
TEXT 2
[Š] Teer
pel > MENU
Use Œ
CAPTION
VISION
>]
Fa
Some programs are broadcast with Caption
Vision. To display Caption Vision, select CC1,
CC2, CC3, CC4, TEXT1, TEXT2, TEXTS, or
TEXT4 from the menu, then press DISPLAY
until Caption Vision is displayed.
CC1, CC2, CC3, or CC4 shows you a caption,
that is, a printed version of the dialogue or
sound effects of a program. (The mode should
be set to CC1 for most programs) TEXT1,
TEXT2, TEXT3, or TEXT4 shows you text, that
is, information presented using either half or the
whole screen. It is not usually related to the
program.
Notes:
* Poor reception of TV programs can cause
errors in Caption Vision and XDS.
Captions may appear with a white box or
other errors instead of intended text.
* XDS, Caption Vision, and the status display
cannot be used at the same time.
15