Sony Trinitron PVM-20M2MDE - Page 36

36
General (common to all models)
Classification of equipment
– Evaluated to EN60601-1, EN60601-1-2, UL2601-1 (First
Edition), CSA601.1
– Type of protection against electric shock
Class I equipment
– Degree of protection against harmful ingress of water
Ordinary equipment
– Degree of safety of application in the presence of a
flammable anaesthetic mixture
Not protected equipment
– Mode of operation Continuous operation
– Information concerning type and frequency of technical
maintenance Not need maintenance equipment
– Main power switch Functional switch
CRT P-22 phosphor
Operating conditions
0 to +40°C (32 to 104°F) Temperature
700 to 1,060 hPa Pressure
30 to 85% (no condensation) Humidity
Transport and Storage conditions
–10 to +40°C (14 to 104°F) Temperature
700 to 1,060 hPa Pressure
0 to 90% Humidity
Accessories supplied
AC power cord (1)
AC plug holder (1)
Side Cover (2)
Control panel cover (1)
Panel hinge (2)
Remote control connector 8-pin mini
DIN (1)
Interface Manual for Programmers (1)
Instructions for Use (1)
For PVM-14M2MDU:
Power requirements 1.2 ~ 0.5A
100 to 240 V AC, 50/60Hz
1)
Dimensions (w/h/d) Approx. 346 × 340 × 431 mm
(13
5
⁄8 × 13
1
⁄2 × 17 inches)
not incl. projecting parts and controls
Mass Approx. 16.7kg (36 lb 13 oz)
c
For PVM-14M2MDE/14M2MDA:
Power requirements 1.2 ~ 0.5A
100 to 240 V AC, 50/60Hz
1)
Dimensions (w/h/d) Approx. 346 × 340 × 431 mm
(13
5
⁄8 × 13
1
⁄2 × 17 inches)
not incl. projecting parts and controls
Mass Approx. 16.7kg (36 lb 13 oz)
For PVM-20M2MDU:
Power requirements 1.5 ~ 0.6A
100 to 240 V AC, 50/60Hz
1)
Dimensions (w/h/d) Approx. 450 × 458 × 503 mm
(17
3
⁄4 ×18
1
⁄8 × 19
7
⁄8 inches)
not incl. projecting parts and controls
Mass Approx. 30.0 kg (66 lb 2 oz)
For PVM-20M2MDE/20M2MDA:
Power requirements 1.5 ~ 0.6A
100 to 240 V AC, 50/60Hz
1)
Dimensions (w/h/d) Approx. 450 × 458 × 503 mm
(17
3
⁄4 ×18
1
⁄8 × 19
7
⁄8 inches)
not incl. projecting parts and controls
Mass Approx. 30.0 kg (66 lb 2 oz)
Design and specifications are subject to change without
notice.
Specifications
1) Use a proper power cord for your local power supply. (See page 22.)
..........................................................................................................................................................................................................