Operation
Printing
13
accumulated on the paper tray. The printer will start
automatically to print the remaining copies.
If the printer does not print
The printer will fail to print when the ALARM, PAPER,
and/or RIBBON indicator light.
For details, see “Indicators on the Front Panel” on page
17.
If the paper or ink ribbon runs out during
printing
The printer stops the printing operation.
Load the paper into the paper tray and the ink ribbon.
Printing of remaining copies is automatically started.
When storing your printouts
• Avoid storing the printout in a location subject to high
temperatures, high humidity, excessive dust and direct
sunlight.
• Do not stick tape on a printout. Also, avoid leaving a
plastic eraser on a printout or placing a printout in
contact with materials which contain plasticizer
(under a desk mat, for example).
To Next Page
Loading...
