To Next PageTo Next PageWhat does it mean if the ALARM indicator is lit or blinking on my Sony Printer?
If the ALARM indicator is lit or blinking on your Sony Printer and an error message is displayed, follow the instructions on the operation display.
Why does authentication fail on my Sony UP-DX100?
Authentication might fail on your Sony Printer because: * The authentication time limit (30 seconds) elapsed. * The same passkey is not entered. * The device disconnected or ended the connection. To resolve this, enter the same passkey correctly both on the printer and the device within 30 seconds. Check the status of the device, try to connect to the device again, and enter the passkey correctly.
Why is my Sony UP-DX100 Printer not printing?
Your Sony Printer might not be printing because the print paper and print cartridge do not match. Use the recommended printing pack, ensuring that the print paper and print cartridge are the same size. Another reason could be that the thermal head is overheated; in this case, leave the printer until the head cools down and printing resumes. Finally, the print paper may be jammed. If so, remove any jammed paper.
What does MEDIA MISMATCH PUSH [EXEC] mean on my Sony Printer?
The 'MEDIA MISMATCH PUSH [EXEC]' message on your Sony printer indicates that the print paper and print cartridge do not match. To resolve this, insert the correct print paper and press the EXEC button.
General| Connectivity | USB 2.0 |
|---|---|
| Print Technology | Dye-sublimation |
| Print Resolution | 300 dpi |
| Media Sizes | 4 x 6 inches |
| Print Speed | Approx. 90 seconds per print (4" x 6") |
