Need help?Do you have a question about the Sony VO-9600 and is the answer not in the manual?
General| Video Format | U-Matic |
|---|---|
| Tape Format | U-Matic |
| Video Signal | NTSC |
| Tape Speed | 19.1 cm/s |
| Audio System | 2-channel linear audio |
| Recording Time | Up to 60 minutes (with KCA-60 tape) |
| Connections | audio in/out |
| Editing functions | Assemble editing |
| Power Requirements | AC 120V, 60Hz |
| Type | Professional U-Matic VCR |
| Fast Forward/Rewind Time | Approx. 4 minutes (with KCA-60 tape) |
| Dimensions | Approx. 420 (W) x 149 (H) x 458 (D) mm |
| Weight | Approx. 18 kg |
Details high-quality picture and Hi-Fi sound capabilities of the SP system.
Covers RS-232C interface, search, programmed operation, and time base corrector.
Explains the concept and use of frame codes for precise locating.
Essential safety instructions for operating and handling the unit.
Guidance on proper unit placement, ventilation, and usage conditions.
Instructions for cleaning the unit and handling during transport.
Details the SP system's compatibility with conventional U-matic recordings.
Information on new SP series tapes designed for enhanced performance.
Diagram and identification of front panel components and controls.
Details on switches, levers, and input/output connectors on the front panel.
Explanation of buttons, lamps, and counter sections on the front panel.
Diagram showing the layout of the rear panel ports and connections.
Detailed description of all rear panel input and output connectors.
Diagrams illustrating connections for camera input and tape dubbing.
Guides for connecting video monitors with or without an 8-pin VTR connector.
Instructions for connecting to a TV receiver or a stereo system.
Details on connecting microphones, headphones, and the power cord.
Step-by-step guide for loading and unloading video cassettes.
Steps required before starting a recording session.
Procedure for initiating and managing the recording process.
How to monitor audio levels and sources during recording.
Process for adding new audio tracks to an existing video tape.
Instructions for recording over parts of a tape and erasing content.
Steps to set up the unit and monitor for playback.
Procedure for starting and managing tape playback.
Guidance on resolving hooking distortion and snow/streaks in playback.
Using MARK IN buttons to set points for programmed playback.
Setting MARK IN A and B points to repeat a specific segment.
Repeating sections between the beginning and a marked point.
Repeating sections from a marked point to the end of the tape.
Using frame codes or a time base corrector for advanced playback.
How to connect and set up the unit for unattended timer operations.
Steps for installing the optional RF modulator.
How to connect and operate the unit with a TV receiver via RF modulator.
Details on operating the VO-9600 using the optional RM-690 remote.
Using optional search control units for automatic tape locating.
Using the RX-707 for frame code-based precise locating and programming.
Instructions for connecting a computer for remote control via RS-232C interface.
Guidance on mounting the unit into a standard 19-inch rack.
Initial checks for power, connections, and basic functionality.
Troubleshooting guide for common operational issues and errors.
Procedure for cleaning the video heads when picture quality degrades.
Information regarding video head lifespan and replacement.
To Next Page
