To Next PageTo Next PageHow to fix a Sony VPL-DX15 that won't turn on?
If your Sony Projector is not turning on, make sure the AC power cable is firmly connected. Also, check that the lamp or lamp cover is securely closed.
Why is there no picture on my Sony VPL-DX15 Projector?
There could be several reasons why your Sony Projector is not displaying a picture. First, ensure that the power is turned on. Next, check all cable connections to make sure they are properly connected. Also, verify that the lens shutter is open and the correct input source is selected. Finally, confirm that the picture is not muted by pressing the PIC MUTING key. If you are using a computer, ensure the signal is set to output to an external monitor.
How to fix color balance on Sony VPL-DX15?
If the color balance on your Sony Projector is incorrect, adjust the image quality settings in the Picture menu. Also, check the setting of “Input-A Signal Sel.” in the Setup menu and select the correct option (“Computer,” “Video GBR” or “Component”) according to the input signal. Finally, ensure that “Color System” in the Setup menu matches the color system being input.
What to do if Sony Projector picture is not clear?
If the picture on your Sony Projector is not clear, try adjusting the focus. If that doesn't work, and you notice condensation on the lens, leave the projector on for about two hours.
Why is my Sony VPL-DX15 picture noisy?
If the picture on your Sony Projector appears noisy, check if the connecting cable is connected properly.
Why is the LAMP/COVER indicator flashing orange on my Sony VPL-DX15 Projector?
If the LAMP/COVER indicator on your Sony Projector is flashing orange with a repetition rate of 2 flashes, it means the lamp cover is detached. Attach the cover securely.
Why does the image extend beyond the screen on my Sony VPL-DX15?
If the image extends beyond the screen on your Sony Projector, and the APA key was pressed even though there are black edges around the image, display the full image on the screen and press the APA key. Alternatively, adjust “Shift” on the Screen setting menu.
What does it mean when the ?/1 key flashes red on my Sony VPL-DX15?
If the ?/1 key flashes red with a repetition rate of 2 flashes, it indicates that the internal temperature is unusually high. Check to see that nothing is blocking the ventilation holes. It could also mean the projector is being used at a high altitude; in this case, ensure that “High Altitude Mode” in the Setup menu is set to “On.”
How to troubleshoot no sound on Sony VPL-DX15?
If there is no sound coming from your Sony Projector, check that all cable connections are correct. Ensure you are using a no-resistance stereo audio cable. Also, verify that the sound is not muted by pressing the AUDIO MUTING key and adjust the volume using the VOLUME +/– key on the Remote Commander.
How to fix Sony VPL-DX15 Projector picture flickering?
If the picture on your Sony Projector is flickering, adjust “Phase” on the Screen setting menu.
General
