What to do if my Sony Projector has no picture?
If your Sony Projector shows no picture, ensure all cables are correctly connected. Turn on the projector first, then the computer. Select the correct input source using the INPUT key. If the picture is muted, press the PIC MUTING key. Also, set your computer signal to output only to an external monitor.
Why is my Sony Projector power not turning on?
If your Sony Projector's power is not turning on, wait about 60 seconds before trying again if you've recently turned it off and on. Make sure the lamp cover and air filter cover are securely closed and attached, respectively.
How to fix a Sony Projector picture that is too dark?
If the picture on your Sony Projector is too dark, adjust the contrast or brightness in the Picture menu. If that doesn't help, the lamp may be burnt out or dim, and it might be time to replace it with a new one.
What to do if the Sony VPL-FE40/FE40L picture is not clear?
If the picture on your Sony Projector is not clear, try adjusting the focus. If that doesn't work, condensation may have accumulated on the lens. Leave the projector on for about two hours to resolve this.
General| Brightness | 4000 Lumens |
|---|---|
| Display Type | 3LCD |
| Resolution | 1024x768 (XGA) |
| Throw Ratio | 1.4 - 2.1:1 |
| Connectivity | HDMI, VGA, S-Video, Composite, RS-232 |
| Lamp Type | UHP |
| Screen Size | 30" to 300" |
| Lens Shift | Vertical: ±60%, Horizontal: ±10% |
| Output Connectors | VGA, HDMI |
| Power Consumption | 270W (Standard) |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20°C to 60°C |
| Lens Type | Manual zoom and focus |
| Lamp Life | 2000 hours (High) / 3000 hours (Standard) / 4000 hours (Low) |
To Next Page
