To Next Page
B
Billy TownsendSep 10, 2025
How do I enable the on-screen display on my Sony VPL-HS50?
- BBrandon FarmerSep 10, 2025
If the on-screen display is not appearing on your Sony Projector, set the “Status” option in the Setup menu to “On.”
How do I enable the on-screen display on my Sony VPL-HS50?
If the on-screen display is not appearing on your Sony Projector, set the “Status” option in the Setup menu to “On.”
Why does the picture from the VIDEO or S VIDEO INPUT connector look strange on my Sony VPL-HS50?
If the picture from the VIDEO or S VIDEO INPUT connector appears colored strangely on your Sony Projector, try adjusting the picture settings in the “Adjust Picture” section of the Picture menu. Also, ensure that the “Color System” setting in the Setup menu matches the color system being input.
Why is the picture from the INPUT A connector colored strange on my Sony VPL-HS50 Projector?
If the picture from the INPUT A connector is displaying strange colors on your Sony Projector, select the appropriate option (“Computer,” “Component” or “Video GBR”) for “Input-A Signal Sel.” in the Setup menu according to the input signal.
Why is there no picture on my Sony VPL-HS50 Projector?
If you're not seeing a picture on your Sony Projector, first, verify that all connections are properly made. Next, make sure you've selected the correct input source using the INPUT button. If you're using a computer, ensure the computer signal is set to output from an external monitor, or only to an external monitor. Also, check the Setup menu and select the appropriate option (“Computer,” “Component” or “Video GBR”) for “Input-A Signal Sel.” based on your input signal.
What to do if the remote control for my Sony VPL-HS50 Projector does not work?
If the remote control for your Sony Projector isn't working, try replacing the batteries with new ones. Ensure that you insert the batteries with the correct polarities.
How to make the picture clearer on my Sony Projector?
To improve picture clarity on your Sony Projector, adjust the focus using the focus ring. If that doesn't fully resolve the issue, leave the projector powered on for about two hours.
What does 'No signal is input in the selected input' mean on my Sony Projector?
If your Sony Projector displays 'No signal is input in the selected input', check the connections to ensure they are properly made.
How to stop the picture from flickering on my Sony VPL-HS50 Projector?
If the picture on your Sony Projector is flickering, adjust the “Dot Phase” setting for “Adjust Signal” in the signal menu.
Why is the LAMP/COVER light flashing on my Sony VPL-HS50 Projector?
If the LAMP/COVER light is flashing on your Sony Projector, make sure that both the lamp cover and the air filter cover are securely attached.
What does it mean when the TEMP/FAN light is on my Sony VPL-HS50 Projector?
If the TEMP/FAN light is illuminated on your Sony Projector, check to see if anything is blocking the ventilation holes or if the projector is being used at high altitudes.
General| Display Technology | LCD |
|---|---|
| Resolution | 1280 x 720 (720p) |
| Contrast Ratio | 6000:1 |
| Lens Shift | Yes |
| Brightness | 1000 ANSI lumens |
| Lamp Life | 2000 hours |
| Inputs | HDMI, Component, Composite, S-Video |
| Projection Size | 40 to 300 inches |
| Throw Distance | 1.5 m to 10 m |
