To Next PageTo Next PageWhy do my Sony VPL-HW50ES and connected equipment turn On/Off at the same time?
If your Sony Projector and connected equipment turn On/Off, play back, and operate at the same time, set “Control for HDMI”, “Device Auto Power Off”, and “PJ Auto Power ON” to “Off.”
Why does the power suddenly turn off on my Sony VPL-HW50ES Projector?
If your Sony Projector's power suddenly turns off, check that “Power Saving” in the Setup menu is set to “Standby.” If it is, set “Power Saving” to “Off.”
What to do if my Sony VPL-HW50ES Projector has no picture?
If your Sony Projector displays no picture, ensure that all connections are properly made. Use the INPUT button to select the correct input source. If you are using a computer, set the computer signal to output from or only to an external monitor.
Why is the picture not clear on my Sony VPL-HW50ES Projector?
If your Sony Projector's picture is not clear, try adjusting the focus. If that doesn't work, leave the projector on for about 2 hours.
Why is the picture too dark on my Sony VPL-HW50ES Projector?
If the picture on your Sony Projector is too dark, adjust the “Contrast” or “Brightness” in the Picture menu.
How to fix faded texts when connected with a computer on Sony VPL-HW50ES?
If the texts appear faded when connected to a computer on your Sony Projector, adjust “Sharpness” in the Picture menu, or set “HDMI Dynamic Range” to “Limited” in the Function menu.
Why do input terminals not appear on my Sony VPL-HW50ES Projector?
If input terminals do not appear on your Sony Projector, set “Auto Input Search” in the Function menu to “Off.”
How to fix image retention on Sony VPL-HW50ES Projector?
If an image is left on the screen of your Sony Projector (image retention), turn off the power for a while to eliminate the retained image.
Why can't I adjust the lens shift on my Sony VPL-HW50ES?
If you cannot adjust the lens shift on your Sony Projector, make sure you are adjusting it within the allowed range of movement.
How to fix picture flickering on Sony VPL-HW50ES Projector?
If the picture on your Sony Projector flickers, activate “APA” and adjust the current input signal. You can also adjust “Phase” for “Adjust Signal” in the Screen menu.
General| Display Technology | SXRD |
|---|---|
| Resolution | 1920 x 1080 |
| Brightness | 1700 lumens |
| Lamp Type | UHP |
| Lens Shift | Vertical: ±71%, Horizontal: ±25% |
| Zoom Ratio | 1.6x |
| 3D | Yes |
| HDMI Ports | 2 |
| Lamp Life | 5000 hours |
| Projection Size | 40 - 300 inches |
| Input Lag | Approximately 25 ms |
| Inputs | HDMI, Component, Composite, RS-232C |
| Dimensions (W x H x D) | 407.4 x 179.2 x 463.9 mm |
| Contrast Ratio | 100, 000:1 (Dynamic) |
Covers safety, heat management, and repacking advice for the projector.
Provides guidelines for the safe operation and use of 3D glasses.
Explains the function of each button on the projector's remote control.
Provides advice on projector placement, ventilation, and orientation for optimal performance.
Details unsuitable locations, improper usage, and ventilation blocking warnings.
Guides on calculating projector-to-screen distances for various sizes using tables.
Ensures the projector lens is parallel to the screen for optimal image fitting.
Adjusts the horizontal and vertical position of the projected image.
Connects audio/video sources like VCRs, Blu-ray players, and computers via HDMI.
Guides on playing 3D content from sources and using 3D glasses.
Diagnosing and resolving problems related to power supply and image display.
Troubleshooting display errors, input terminal visibility, and remote control functionality.
Interpreting projector status lights and understanding warning messages.
Procedure for replacing the projector lamp and air filter, and cleaning ventilation holes.
Instructions for attaching the projector suspension support for ceiling mounting.
