To Next PageTo Next PageHow to remove ghosts from picture on Sony VPL-HW50ES Projector?
If you see ghosts in the picture on your Sony Projector, watch the 3D video images using the 3D glasses, or set “2D-3D Display Sel.” to “2D.”
Why can't I adjust the lens shift on my Sony VPL-HW50ES?
If you cannot adjust the lens shift on your Sony Projector, make sure you are adjusting it within the allowed range of movement.
Why do my Sony VPL-HW50ES and connected equipment turn On/Off at the same time?
If your Sony Projector and connected equipment turn On/Off, play back, and operate at the same time, set “Control for HDMI”, “Device Auto Power Off”, and “PJ Auto Power ON” to “Off.”
How to fix image retention on Sony VPL-HW50ES Projector?
If an image is left on the screen of your Sony Projector (image retention), turn off the power for a while to eliminate the retained image.
Why does the on-screen display not appear on my Sony VPL-HW50ES?
If the on-screen display does not appear on your Sony Projector, set “Status” in the Setup menu to “On.” Also, check if the ON/STANDBY indicator should light in green.
Why do input terminals not appear on my Sony VPL-HW50ES Projector?
If input terminals do not appear on your Sony Projector, set “Auto Input Search” in the Function menu to “Off.”
General| Display Technology | SXRD |
|---|---|
| Resolution | 1920 x 1080 |
| Brightness | 1700 lumens |
| Lamp Type | UHP |
| Lens Shift | Vertical: ±71%, Horizontal: ±25% |
| Zoom Ratio | 1.6x |
| 3D | Yes |
| HDMI Ports | 2 |
| Lamp Life | 5000 hours |
| Projection Size | 40 - 300 inches |
| Input Lag | Approximately 25 ms |
| Inputs | HDMI, Component, Composite, RS-232C |
| Dimensions (W x H x D) | 407.4 x 179.2 x 463.9 mm |
| Contrast Ratio | 100, 000:1 (Dynamic) |
Covers safety, heat management, and repacking advice for the projector.
Provides guidelines for the safe operation and use of 3D glasses.
Explains the function of each button on the projector's remote control.
Provides advice on projector placement, ventilation, and orientation for optimal performance.
Details unsuitable locations, improper usage, and ventilation blocking warnings.
Guides on calculating projector-to-screen distances for various sizes using tables.
Ensures the projector lens is parallel to the screen for optimal image fitting.
Adjusts the horizontal and vertical position of the projected image.
Connects audio/video sources like VCRs, Blu-ray players, and computers via HDMI.
Guides on playing 3D content from sources and using 3D glasses.
Diagnosing and resolving problems related to power supply and image display.
Troubleshooting display errors, input terminal visibility, and remote control functionality.
Interpreting projector status lights and understanding warning messages.
Procedure for replacing the projector lamp and air filter, and cleaning ventilation holes.
Instructions for attaching the projector suspension support for ceiling mounting.
