Need help?Do you have a question about the Sony VPL-VW5000 and is the answer not in the manual?
General| Heat dissipation | 4092 BTU/h |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | - m |
| Projection technology | SXRD |
| Contrast ratio (typical) | - |
| Screen size compatibility | - \ |
| Projector native resolution | DCI 4K (4096x2160) |
| Throw ratio | 1.28 - 2.73:1 |
| Zoom capability | Yes |
| Focal length range | - mm |
| Vertical lens shift range | -80 - 80 % |
| Horizontal lens shift range | -31 - 31 % |
| Light source type | Laser |
| Service life of light source | - h |
| Video processing | 12 bit |
| Supported graphics resolutions | 320 x 288 (QVGA), 640 x 480 (VGA), 720 x 480, 720 x 576, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1360 x 768 (WXGA), 1920 x 1080 (HD 1080), 3840 x 2160, 4096 x 2160 |
| DVI port | No |
| HDMI connector type | Full-size |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Placement | Desktop |
| Product type | Large venue projector |
| Product color | Black |
| Market positioning | Home cinema |
| Noise level | 30 dB |
| Noise level (high brightness) | 35 dB |
| Cables included | AC |
| Remote control type | IR |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 1200 W |
| Power consumption (standby) | 0.5 W |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Battery type | AA |
| Harmonized System (HS) code | 85286200 |
Weight and Dimensions| Depth | 750 mm |
|---|---|
| Width | 550 mm |
| Height | 228 mm |
| Weight | 43000 g |
Instructions on positioning and installing the projector for optimal placement and viewing.
Steps to project an image and adjust its size and position on the screen.
Basic steps to turn on and display an image from connected sources.
How to enjoy 3D content using optional active 3D glasses and settings.
Explains how to navigate and interact with the projector's on-screen menu system.
Configuring network settings, power saving, and system resets.
Fine-tuning 3D brightness, depth, and simulated 3D effects.
Solutions for power and picture problems like no image, ghosts, or incorrect brightness.
Solutions for remote control, 3D image problems, and fan noise.
To Next Page
