Why is my Sony VPL-VW95ES power not turning on?
The power may not turn on if you turn it off and on again too quickly. Wait about 1 minute before turning it back on. Also, make sure the lamp cover and filter holder are securely closed and tightened. Check the warning indicators as well.
Why is there no picture on my Sony VPL-VW95ES?
First, ensure that all connections to your Sony Projector are properly made. Next, select the correct input source using the INPUT button. If using a computer, set the computer signal to output from or only to an external monitor. Also, select the appropriate option ('Computer,' 'Component,' or 'Video GBR') for 'Input-A Signal Sel.' on the Setup menu according to your input signal.
What to do if my Sony VPL-VW95ES Projector picture is too dark?
Adjust the 'Contrast' or 'Brightness' settings properly on the Picture menu of your Sony Projector to brighten the image.
Why is the picture from the INPUT A connector colored strange on my Sony Projector?
Select the correct input signal ('Computer,' 'Component,' or 'Video GBR') for 'Input-A Signal Sel.' on the Setup menu of your Sony Projector to resolve the color issue.
What to do if bright areas are unclear on Sony VPL-VW95ES Projector with HDMI?
This issue may occur if the input signal doesn't fully comply with HDMI standards. Try switching the RGB dynamic range of the connected equipment to Limited (16-235). If this isn't possible, adjust 'Brightness,' 'Contrast,' or 'Sharpness' in the Picture menu of your Sony Projector.
Why are the texts faded when connected with a computer on my Sony VPL-VW95ES?
This issue can arise if the input signal doesn't fully comply with HDMI standards. Adjust the 'Sharpness' setting within the Picture menu on your Sony Projector to improve text clarity.
How to fix a blurry picture on my Sony Projector?
First, adjust the focus of your Sony Projector. If the picture is still not clear, condensation may have accumulated on the lens. Leave the projector on for about 2 hours to allow the condensation to dissipate.
Why does the Sony Projector picture have ghosts?
The video images may be displayed in 3D. If you are watching 3D video, use 3D glasses and set '2D-3D Display Sel.' to '3D' on your Sony Projector.
General| Lamp type | UHP |
|---|---|
| Native resolution | 1920 x 1080 pixels |
| Native aspect ratio | 16:9 |
| Projection technology | SXRD |
| Screen size compatibility | 40 - 300 \ |
| Projector native resolution | 1080p (1920x1080) |
| Vertical synchronization (max) | 92 kHz |
| Vertical synchronization (min) | 48 kHz |
| Horizontal synchronization (max) | 72 kHz |
| Horizontal synchronization (min) | 19 kHz |
| Bulb power | 200 W |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 5 - 35 °C |
| Power consumption (typical) | 300 W |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 35 - 85 % |
| Product color | Black |
| Interface | 2 x HDMI |
| Serial interface type | RS-232C |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Consumer Electronics Control (CEC) support | Yes |
| Light source type | Lamp |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 8 W |
| Product type | Large venue projector |
| Focal length range | 18.5 - 29.6 mm |
| Aperture range (F-F) | 2.5 - 3.4 |
| Display diagonal | 0.61 \ |
| Ethernet LAN | No |
| Noise level | - dB |
Weight and Dimensions| Depth | 179.2 mm |
|---|---|
| Width | 470 mm |
| Height | 484.9 mm |
| Weight | 1100 g |
| Dimensions (WxDxH) | 470 x 179.2 x 484.9 mm |
To Next Page
