To Next PageTo Next PageWhy does my Sony TV screen go blank during channel change?
If your Sony TV screen sometimes goes blank for a slightly longer period during channel changes, the “Signal Booster” is likely detecting a weak signal. This is normal and does not indicate a malfunction.
What to do if my Sony Wega KV-BZ14 TV has good picture but no sound?
If you have a good picture but no sound on your Sony TV: * Increase the volume level. * Check if the TV is muted and, if so, cancel the muting.
Why is there good picture but no sound on my Sony Wega KV-BZ14 TV?
If your Sony TV has good picture but no sound, try pressing the volume up button to increase the volume. Also, make sure you haven't accidentally muted the TV by pressing the mute button.
What to do if my Sony Wega KV-BZ14 TV picture is good, but there is no sound?
If your Sony TV has a good picture but no sound, first, increase the volume level. If that doesn't work, make sure the TV is not muted by pressing the mute button.
How to fix snowy picture and noisy sound on Sony Wega KV-BZ14 TV?
To address a snowy picture and noisy sound on your Sony TV: * Check the antenna cable and its connections at the TV, VCR, and wall. * Check the antenna setup. Contact a Sony dealer for advice. * Access the “Channel Setup” menu and select “Manual Program” to preset the channel again. * In the “Channel Setup” menu, set the “Signal Booster” to “Auto” from “Manual Program”. * Try using an external booster.
Why does my Sony Wega KV-BZ14 make a boom sound when turned on?
The small “boom” sound you hear when turning on your Sony TV is the TV’s demagnetizing function working. This is normal and does not indicate a malfunction.
What causes dotted lines or stripes on my Sony Wega KV-BZ14 TV screen?
If you see dotted lines or stripes on your Sony TV, make sure you are not using a hair dryer or other equipment near the TV. You may also need to check your antenna setup or contact a Sony dealer for advice.
Why does my Sony TV cabinet creak?
The creaking sound from your Sony TV cabinet is due to changes in room temperature causing the cabinet to expand or contract. This is normal and not a malfunction.
How to fix abnormal color patches on Sony Wega KV-BZ14?
If your Sony TV displays abnormal color patches, keep external speakers or other equipment away from the TV. Avoid moving the TV while it is turned on. Turn off the TV using the main power switch for about 15 minutes, then turn it back on to demagnetize it.
How to get rid of dotted lines or stripes on Sony Wega KV-BZ14?
If your Sony TV displays dotted lines or stripes, avoid using a hair dryer or other electrical equipment near the TV. Also, check the antenna setup.
Overview of buttons on the TV's top panel.
Description of front panel audio/video input jacks.
Description of rear panel antenna, monitor, and video inputs.
Overview of WEGA GATE menu for TV, inputs, and settings.
Step-by-step guide to navigating the WEGA GATE menu.
Select picture mode and adjust white color tint.
Fine-tune contrast, brightness, color, hue, and sharpness.
Select sound mode and adjust speaker balance.
Use the graphic equalizer to adjust sound frequency settings.
Reset TV to factory defaults to resolve common problems.
Guide to fixing picture and sound issues like noise or distortion.
Solutions for picture slant, abnormal color, and cabinet creaks.
Troubleshooting standby indicator flashes and 'boom' sounds.
Overview of buttons on the TV's top panel.
Description of front panel audio/video input jacks.
Description of rear panel antenna, monitor, and video inputs.
Overview of WEGA GATE menu for TV, inputs, and settings.
Step-by-step guide to navigating the WEGA GATE menu.
Select picture mode and adjust white color tint.
Fine-tune contrast, brightness, color, hue, and sharpness.
Select sound mode and adjust speaker balance.
Use the graphic equalizer to adjust sound frequency settings.
Reset TV to factory defaults to resolve common problems.
Guide to fixing picture and sound issues like noise or distortion.
Solutions for picture slant, abnormal color, and cabinet creaks.
Troubleshooting standby indicator flashes and 'boom' sounds.
General