To Next PageTo Next PageHow to get rid of dotted lines or stripes on Sony Wega KV-BZ14?
If your Sony TV displays dotted lines or stripes, avoid using a hair dryer or other electrical equipment near the TV. Also, check the antenna setup.
Why does Sony TV screen go blank during channel change?
The blank screen during channel changes on your Sony TV indicates that the “Signal Booster” is detecting a weak signal. This is normal and does not indicate a malfunction.
Why is there no color on my Sony TV?
If your Sony TV has no color, go to the “Picture” menu, select “Custom” from “Picture Mode”, and adjust the “Color” level in “Picture Adjustment”. For video input, access the “Setup” menu and verify the “Color System” setting, usually set to “Auto”. Also, check the antenna setup or contact a Sony dealer for advice.
How to fix double images or ghosts on Sony Wega KV-BZ14?
If your Sony TV displays double images or “ghosts”, try using a highly directional antenna. Also, check your antenna setup or contact a Sony dealer for advice. Another solution is to turn off or disconnect any external booster that is in use.
How to fix double images or ghosts on my Sony Wega KV-BZ14?
To resolve double images or “ghosts” on your Sony TV: * Use a highly directional antenna. * Use the fine tuning (“Fine”) function. * Check the antenna setup. Contact a Sony dealer for advice. * Turn off or disconnect the external booster if it is in use.
How to fix snowy picture and noisy sound on Sony Wega KV-BZ14 TV?
To address a snowy picture and noisy sound on your Sony TV: * Check the antenna cable and its connections at the TV, VCR, and wall. * Check the antenna setup. Contact a Sony dealer for advice. * Access the “Channel Setup” menu and select “Manual Program” to preset the channel again. * In the “Channel Setup” menu, set the “Signal Booster” to “Auto” from “Manual Program”. * Try using an external booster.
What to do if my Sony Wega KV-BZ14 TV picture is good, but there is no sound?
If your Sony TV has a good picture but no sound, first, increase the volume level. If that doesn't work, make sure the TV is not muted by pressing the mute button.
Why is there good picture but no sound on my Sony Wega KV-BZ14 TV?
If your Sony TV has good picture but no sound, try pressing the volume up button to increase the volume. Also, make sure you haven't accidentally muted the TV by pressing the mute button.
What to do if my Sony Wega KV-BZ14 TV has no picture and no sound?
If your Sony TV shows no picture and produces no sound, try the following: * Ensure the power cord, antenna, and VCR connections are properly connected. * Press the power button to turn on the TV. * Turn the main power off for five seconds, then turn it on again.
Why does my Sony Wega KV-BZ14 make a boom sound when turned on?
Overview of buttons on the TV's top panel.
Description of front panel audio/video input jacks.
Description of rear panel antenna, monitor, and video inputs.
Overview of WEGA GATE menu for TV, inputs, and settings.
Step-by-step guide to navigating the WEGA GATE menu.
Select picture mode and adjust white color tint.
Fine-tune contrast, brightness, color, hue, and sharpness.
Select sound mode and adjust speaker balance.
Use the graphic equalizer to adjust sound frequency settings.
Reset TV to factory defaults to resolve common problems.
Guide to fixing picture and sound issues like noise or distortion.
Solutions for picture slant, abnormal color, and cabinet creaks.
Troubleshooting standby indicator flashes and 'boom' sounds.
General