If the headset units and charging case are charged while they are wet with sweat, etc., the charging ports will
corrode. Before charging, wipe off any moisture with a soft dry cloth and leave to dry in room temperature.
Repairs in case of a malfunction without care are not covered by the free warranty.
When the charging ports of the headset units or charging case get dirty, wipe them clean with a soft dry cloth.
Do not wash pants or shirts with the headset units left in the pockets.
Turn the microphone part or air hole part downward and gently tap it about 5 times on a dry cloth, etc. to remove
any water collected inside.
3.
Leave the headset to dry in room temperature.4.
To Next Page
Loading...
