Help Guide
Wireless Noise Canceling Stereo Headset
WF-C700N
Resetting the headset
If the headset cannot be turned on or cannot be operated even when it is turned on, reset the headset. Reset one of the
headset units at a time.
The pairing information and other settings are retained.
Set one of the headset units into the charging case.
Leave the charging case lid open.
1
Press and hold the reset button on the back of the charging case for about 20 seconds or more.
After about 15 seconds, the indicator (orange) on the charging case flashes for about 5 seconds.
Then, the indicator on the charging case turns off and the headset will be reset.
2
Check that the indicator turns off and then release your finger.
3
Remove the headset unit from the charging case and start the operation again from step
with the other
headset unit.
4
To Next Page
Loading...
