Help Guide
Wireless Noise Canceling Stereo Headset
WH-1000XM4
Connecting to a paired iPhone
Unlock the screen of the iPhone if it is locked.
1
Turn on the headset.
Press and hold the
(power) button for about 2 seconds.
You will hear the voice guidance say, “Power on”. Check that the indicator (blue) continues to flash after you release
your finger from the button.
If the headset has automatically connected to the last connected device, you will hear the voice guidance say,
“Bluetooth connected”.
Check the connection status on the iPhone. If it is not connected, proceed to step 3.
2
Display the devices paired with the iPhone.
3
Select [Settings].
1.
Touch [Bluetooth].
2.
Touch the switch to turn on the Bluetooth function.
3.
To Next Page
Loading...
Need help?
General
