To Next PageTo Next Page
Need help?Do you have a question about the Sony WM-10 and is the answer not in the manual?
General| Type | Cassette Player |
|---|---|
| Brand | Sony |
| Model | WM-10 |
| Weight | 170 g (including battery) |
| Headphones | 3.5 mm jack |
Essential safety and procedural guidelines before commencing repair work.
Lists causes and locations for complete lack of operation.
Explains noise issues occurring when battery voltage drops below 0.9V.
Troubleshoots lack of power and the LED not illuminating.
Addresses issues where the voltage converter circuit fails to operate.
Provides steps to check the converter board's 3V output voltage.
Diagnoses motor not stopping after Fast Forward/Rewind operations.
Guides through checking power supply, coils, and Hall elements for motor failure.
Provides specific tests for motor coil continuity and Hall element function.
Addresses problems with incorrect tape playback speeds.
Troubleshooting for the lack of speed increase during certain operations.
Outlines checks for servo boards' motor control functions.
Illustrates waveforms and voltages for various points on the servo boards.
Shows component placement and signal paths on Servo Board (A) and (B).
Explains muting operation and checks for silence during playback.
Covers no sound during forward playback and reduced sound volume output.
Addresses Dolby system faults and audible humming noise during playback.
Troubleshooting for unwanted noise specifically on the left channel.
Covers common mechanical failures, noise, and shut-off issues.
Guides through checking motor rotation, button locks, and tape path.
Addresses button operation, tape winding, damage, and pinch roller issues.
Explains tape winding issues and damage during ejection.
A consolidated list of common faults, causes, and repair procedures.
