Sony WM-FX463

MICROFILM
RADIO CASSETTE PLAYER
SERVICE MANUAL
US Model
Canadian Model
AEP Model
E Model
SPECIFICATIONS
WM-FX463/FX465
Photo: FX465
Model Name Using Similar Mechanism NEW
Tape Transport Mechanism Type MT-WMEX342-114
• Frequency range
FM: 87.5 – 108 MHz (0.1 MHz step)
(US, Canadian model)
87.5 – 108 MHz (0.05 MHz step)
(EXCEPT US, Canadian, East European model)
65 – 74 MHz 87.5 – 108 MHz (0.05 MHz step)
(East European model)
AM: 530 – 1,710 kHz (10 kHz step)
(US, Canadian model)
531 – 1,602 kHz (9 kHz step)
(EXCEPT US, Canadian model)
TV: 2 – 13 channel
(US model)
• Power requirements
3V DC batteries AA (R6) × 2/External DC 3V power sources
• Dimensions
112.5 × 86.6 × 33.1 mm (4
1
/2 × 3
1
/2 × 1
5
/16 inches) (w/h/d) incl. projecting
parts and controls
• Mass
Approx.150 g (5.3 oz)
Approx.265 g (9.4 oz) incl. batteries, cassete, headphones and belt clip.
• Supplied accessories
Stereo headphones or earphones (1)/Belt clip (1)
Design and specifications are subject to change without notice.
* Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol a are trademarks of Dolby Labo-
ratories Licensing Corporation.
Battery life (approximate hours)
Sony alkaline Sony
LR6 (SG) R6P (SR)
Playback 22 7
radio 38 14
To use external power
• For house current: Connect AC-E30HG AC power adaptor (not supplied)
to the DC IN 3 V jack.
• For 12 V/24 V car battery: Connect the recommended DCC-E130L or
DCC-E230 car battery cord to the DC IN 3 V jack.
Ver 1.1 1999. 12
With SUPPLEMENT-2
(9-923-190-82)
All manuals and user guides at all-guides.com
all-guides.com

Sony WM-FX463 Specifications

General

Type	Cassette Player
Brand	Sony
Model	WM-FX463
Media Type	Cassette
Radio Tuner	AM/FM
Power Source	2 x AA batteries
Mega Bass	Yes
Auto Reverse	Yes
Playback Functions	Play, Stop, Rewind, Fast Forward
Headphone Output	3.5mm

Summary

Specifications

Section 1 General

Location of Parts and Controls

Identifies and labels all external buttons, switches, and indicators.

Section 2 Disassembly

Cabinet (Rear) Assembly Disassembly

Procedure for removing the rear cabinet cover and its components.

Main Board and Mechanism Deck Disassembly

Steps to detach the main circuit board and mechanism deck.

Section 4 Electrical Adjustments

Tape Speed Adjustment

Steps to calibrate the tape playback speed using test tapes.

Section 5 Diagrams

Schematic Diagrams

Circuit schematics for the main and display boards.

Section 7 Electrical Parts List

Capacitors and Resistors

Comprehensive list of capacitors and resistors used in the device.

Semiconductors and Other Components

Listing of transistors, diodes, ICs, coils, etc.

Supplement-1: Motor Change

Motor Identification and Replacement

Guidance on identifying and replacing the motor M901.