12
2000 MOBILE PRODUCT GUIDE – PART 2
OTL (output transformerless) Circuit
Pulse Power Supply
RCA Pin Jacks
High Level Input Connector
Speaker Terminals
2-8 ohms (stereo)
4-8 ohms (when used as bridging amplifier)
40 W x 4 (20-20 kHz, 0.04% THD, at 4 Ω)
50 W x 4 (20-20 kHz, 0.1% THD, at 2 Ω)
100 W x 2 (20-20 kHz, 0.1% THD, at 4 Ω)
80 W x 4 (at 4 Ω)
80 W x 2 + 200 W x 1 (at 4 Ω)
200 W x 2 (at 4 Ω)
50 Hz, 200 Hz, 800 Hz, 3.2 kHz, 12.8 kHz ± 12 dB
5-100 Hz (+0/-3 dB)
0.005% or less (at 1 kHz, 4 Ω)
0.2-4.0 V (RCA pin jack);
0.4-8.0 V (high level input)
50-200 Hz, -12 dB/oct
50-200 Hz, -12 dB/oct
12 V DC Car Battery (negative ground)
10.5-16 V
At Rated Output: 23 A
Remote Input: 1.5 mA
Approx. 282 x 55 x 320 mm (11
1
/8 x 2
1
/4 x 12
5
/8 in.) (not incl. projecting parts and controls)
Approx. 3.2 kg (7 lb. 1 oz.) (not including accessories)
Mounting Screws (4); Terminal Cap (1)
Specifications
Circuit System
Inputs
Outputs
Speaker Impedance
Rated Outputs (at 14.4 VDC)
Maximum Output
Equalizer
Frequency Response
Harmonic Distortion
Input Level Adjustment Range
High-Pass Filter
Low-Pass Filter
Power Requirements
Power Supply Voltage
Current Drain
Dimensions (w/h/d)
Weight
Supplied Accessories
XM-404EQX
4/3/2 Channel Amplifier/EQ
• Recessed Controls w/Level LEDs
• Variable 50-200 Hz Hi-Pass/Lo-Pass Filter
• 50/200/800/3.2k/12.8 kHz Frequency Centers
• F&R 5 Band +/- 12 dB Adjustable EQ
• Heavy-Duty Connectors
• 40 W x 4 Ch at 0.04% THD
• 40 W x 2 + 100 W x1 at 0.1% THD
• 100 W x 2 at 0.1% THD
• RCA and Speaker Level Inputs
• Regulated MOSFET Power Supply
Design and specifications subject to change without notice.
To Next Page
Need help?
General
